Related Manuals for Resol TT1
Summary of Contents for Resol TT1
- Page 1 RESOL TT1 Mounting Connection Handling Fault localization manual Thanks for buying a RESOL product. www.resol.de Read this manual carefully to get the best perfomance from this unit.
-
Page 2: Table Of Contents
Please pay attention to the following security advice in order We, RESOL Elektronische Regelungen GmbH, D-45527 to avoid danger and damage to people and property. Hattingen, declare under our sole responsibility that our product TT1 complies with the following standards: Instructions EN 55 014-1 Attention should be paid... -
Page 3: Tecnical Data And Function Survey
Temp. for ball pressure check: 75 °C Operating mode Electronic temperature controller (thermostat)with combi- The RESOL thermostat compares the temperature ned LCD display for indicating the current temperature and measured by the temperature sensor with the ad- the setting parameters (menue guided) justed switch-on temperature. -
Page 4: Sensor Types
1. Sensor types Precision-platin sensors type PT1000 (FKP and FRP) are FK: 1,5 m weather- and temperature resistant silicone cable used for TT1 for temperatures between -50 °C ... +180 °C, mostly used for collectors. The arrangement of the sensors is of great importance to the total efficiency of the regulator. -
Page 5: Installation
Thermostat 2. Installation 2.1 Mounting Warning! Switch-off power supply before opening the housing. housing operation control lamp The unit must only be located internally. It is not suitable for installation in hazardous locations and should not be combined LCD cover sited near to any electromagnetic field. -
Page 6: Operating And Function
Thermostat TT1.mon05229en.pdf 3 Operation and function 3.1 Pushbuttons for adjustment The controller is operated by 3 pushbuttons below the display. The forward-key (1) is used for scrolling forward through the indication menu or to increase the adjustment values. The backwards-key (2) is accordingly used for the reverse function. -
Page 7: Adjustment Channel To
Thermostat 3.4 Adjustment channel TF If the sensor temperature TT exceeds the in TF adjusted switch-off temperature the controller switches the relais off. The symbol disappears in the display and the status-LED is iluminated red. The relais stays turned off during the adjusted switch off de- TF: Switch-off temperature lay (DF) to avoid ineffective switching on/off of the relais. -
Page 8: Commisioning
Thermostat 4. Commisioning Ac power supply must be activated. The controller passes an initialisation phase in which the operating control lamp flashes red and green. If individual conditions require an adaptation of the parame- ter, please adjust the values accordingly (vgl. 3.3). Tips for fault location Please check the following points if the controller does not work faultlessly:...
Need help?
Do you have a question about the TT1 and is the answer not in the manual?
Questions and answers