Gardena T 1030 Operating Instructions Manual page 16
Hide thumbs
Also See for T 1030:
- Opearting instructions (20 pages) ,
- Operating instructions manual (20 pages) ,
- Operating instructions manual (20 pages)
Table of Contents
Advertisement
Description of the product :
Désignation du matériel :
Omschrijving van het apparaat :
Opis urz№dzenia :
Περιγραφή του μηχανήματος : Προγραμματιστή Ποτίσματος
Ime naprave :
Oznaka naprave :
EU directives :
Directives européennes :
EU-richtlijnen :
Dyrektywy UE :
Προδιαγραφές ΕΚ :
Smernice EU :
Smjernice EU :
Ulm, 01.08.2004
Fait à Ulm, le 01.08.2004
Ulm, 01-08-2004
Ulm, 01.08.2004r.
Ulm, 01.08.2004
Ulm, 01.08.2004
V Ulmu, dne 01.08.2004
Water Timer
Programmateur nez de robinet
Watertimer
Sterownik nawadniania
Ura za zalivanje
Mjeraè vremena za navodnjavanje
89 / 336 / EC
93 / 68 / EC
Peter Lameli
Technical Dept. Manager
Direction technique
Hoofd technische dienst
Kierownictwo Techniczne
Διευθυντής Τεχνικού Τμήματος
Voditelj tehniиkog odjela
Technickэ шeditel
Type :
Type :
Typ :
T 1030 card
Typ :
Τύπος :
Tip :
Tip :
Year of CE marking :
Date d'apposition du marquage CE :
Installatiejaar van de CE-aanduiding :
Rok nadania znaku CE :
Έτος πιστοποιητικού ποι τητας CE
Leto pridobitve CE-oznake :
Godina oznake CE :
Art. No.:
Référence :
Art. nr.:
1830
Nr art.:
Κωδ. Νο. :
Art. љt.:
Art.br.:
2004
95
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the T 1030 and is the answer not in the manual?
Questions and answers
Water can be heard running from the tap when start button is pressed but no watering is being started. Battery is OK. The unit has always operated perfectly so not sure why this has suddenly happened.
The Gardena T 1030 may not be starting watering despite hearing water running from the tap due to one or more of the following reasons:
1. Battery is low or flat: If the battery capacity is too low, a warning signal beeps every 15 seconds, and the timer will not run programmed watering. Also, the valve cannot be opened manually.
2. Battery inserted incorrectly: If the battery is not inserted with the correct polarity, the device will not function.
3. Moisture Sensor or Rain Sensor: If connected, these may detect adequate soil moisture and prevent the watering program from running.
4. Start time not set or reset: If the timer has been reset or the start time is not correctly set, the watering program may not start at the intended time.
5. Water damage: Water entering the unit or battery compartment, as mentioned in one user's experience, may cause the device to malfunction.
In summary, check the battery status and installation, ensure the start time is correctly set, verify sensor settings, and inspect for water damage.
This answer is automatically generated