NEC DT730 User Manual page 152

[Illumination]
Automatic
1
Default
2
Disable
3
Red
4
Green
5
Yellow
6
7 Blue
8
Light Blue Download3
9 Purple
White
10
11 Rotation
TIP: The user can set illumination type for calls routed
to the specified name (calling party) here. Illumi-
nation type can be set for "Name", "Group" and
"Telephone set". The illumination type set for
"Name" has higer priority than the types set for
"Group" and "Terminal set".
TIP: If the illumination setting is not performed, 1
Automatic is applied.
TIP: When 1 Automatic or 2 Default is selected, the
setting for "Group" or "Telephone Set" is applied.
STEP 19:The display goes back to the Edit screen. Se-
0
lect Memory ID and then press
ter), (Right-cursor) or OK soft key. (or
press 0 key.)
Back OK
(En-
[Edit]
Name:Ken Cobus
1
Group:Colleagues
2
Tel#1:31300
3
Tel#2:
4
Tel#3:
5
Tel#4:
6
7 Company Name:NEC
8
9
0
Save
STEP 20:Enter a desired Memory Number (0 - 499),
then press
[Memory ID]
Input a memory number.
0-499
BK
TIP: A maximum of 500 Memory IDs can be regis-
tered. If
assigned to a Memory ID, the user may not regis-
ter up to 500 Memory IDs.
TIP: If Memory ID setting is not performed, a number
is automatically set in ascending numeric order.
STEP 21:When the display goes back to the Edit
142
Ring Tone:Automatic
Illumination:Automatic
Memory ID:0
Back OK
(Enter) or OK soft key.
1
Back OK
multiple telephone numbers are