Page 1
HW-J7500R HW-J7501R User manual Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register...
GETTING STARTED GETTING STARTED SAFETY INFORMATION SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that high voltage is CAUTION present inside.
Page 3
GETTING STARTED PRECAUTIONS 68.6 mm 99.1mm 99.1mm 99.1mm Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7~10 cm).
GETTING STARTED CONTENTS GETTING STARTED 23 FUNCTIONS Safety Information Input Mode What’s Included Bluetooth Using the Multiroom App DESCRIPTIONS Using the Network Standby On Function Top / Front Panel Software Update Rear / Bottom Panel Remote Control 31 TROUBLESHOOTING 10 INSTALLATION Troubleshooting Installing the Soundbar 32 APPENDIX...
GETTING STARTED WHAT’S INCLUDED BEFORE READING THE USER’S MANUAL Note the following terms before reading the user manual. + Icons used in this manual Icon Term Definition Caution Indicates a situation where a function does not operate or settings may be canceled. Note Indicates tips or instructions on the page that help you operate a function.
DESCRIPTIONS DESCRIPTIONS TOP / FRONT PANEL VOL. - / + (Power) Button Controls the volume level. The numeric value of the volume level Turns the power on and off. appears in the front panel display. (Source) Button Display Selects the D.IN, AUX, HDMI, BT, or TV input. Displays the current mode.
Samsung HUB (purchased Port. adaptor to the power setup. (Requires a smart separately) or a network. supply jack, and then device and the Samsung (Requires a smart device connect the AC power Multiroom app. and the Samsung adaptor plug to a wall See page 26.)
(Default : Auto Power Link OFF, ON - ANYNET+ / OFF - POWER LINK or OFF - ANYNET+ / ON - POWER LINK). The Anynet+ function lets you control the Soundbar with the remote from an Anynet+ compatible Samsung TV. The Soundbar must be connected to the TV via an HDMI cable.
Page 9
DESCRIPTIONS Power Turns the Soundbar on and off. Volume Adjusts the volume level of the unit. Play / Pause Press the p button to pause a file temporarily. Press the p button again to play the selected file. Skip Back If there is more than one file on the device you are playing, and you press the [ button, the previous file is selected.
INSTALLATION INSTALLATION INSTALLING THE SOUNDBAR INSTALLING THE WALL MOUNT + Installation Precautions ● Install on a vertical wall only. ● For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight of the set.
Page 11
INSTALLATION 1. Place the Soundbar as shown in the illustration, ensuring that none of the buttons touch the surface it is lying on. 2. If the Holder-Foot (3 EA) and Holder-Support (2 EA) are attached, remove them. Holder-Foot Holder-Support 3. Fix Holder-Screw 1 (4 EA) and Holder-Screw 2 (for main unit fixing) (4 EA) into the holes of the Soundbar tightly as shown in the illustration.
Page 12
INSTALLATION Wall 4. Insert the Wall-Mount Screws into the 3 holes one by one to fix the Wall-Mount Bracket on the wall. ● Recommended screw : M5 5. Mount the Soundbar on the Wall-Mount Bracket in order of the following illustration (1 2).
Page 13
INSTALLATION 6. Fix the Holder-Fix Mount (for wall-mount fixing) to join the Wall-Mount Bracket with the Soundbar. ● Wall-Mount Screws are not provided. ● Since different types of wall-mount screws are required depending on your wall, you should check your wall before installation and purchase the appropriate wall-mount screws to use.
INSTALLATION PLACING THE SOUNDBAR ON A TV STAND Place the Soundbar on a TV stand. Check for the supplied accessories shown below. Holder-Foot : 3EA Holder-Screw 2 : 3EA 1. Place the Soundbar as shown in the illustration, ensuring that none of the buttons touch the surface it is lying on.
Page 15
INSTALLATION 3. Remove Holder-Support (2 EA) from the Soundbar as shown in the illustration. 4. Align the Soundbar’s center with the center of the base of the TV, and then carefully push it onto the stand as far as it will go, as shown in the illustration. Be careful not to unbalance the TV. ●...
INSTALLATION INSTALLING THE SOUNDBAR AS A FREE-STANDING UNIT 1. Center the Soundbar on the flat area in front of the TV. ASSEMBLING THE CLAMP-WIRE Clamp-Wire Attach the clamp-wire to the unit as shown, and then run the cables through the clamp-wire to keep them neat.
CONNECTIONS CONNECTIONS ● Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete. ● Before moving or installing this product, be sure to turn off the power and disconnect the power cord. CONNECTING THE SUBWOOFER CONNECTING TO THE SUBWOOFER AUTOMATICALLY The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly)
Page 18
CONNECTIONS ● Before moving or installing the product, be sure to turn off the power and disconnect the power cord. ● If the main unit is powered off,the wireless subwoofer will in standy mode and the STANDBY LED on the front will blink Red directly.
CONNECTIONS CONNECTING TO A TV ● Important: Before you begin, put the battery into the remote. See page 9 for instructions. CONNECTING TO A TV USING AN HDMI (DIGITAL) CABLE HDMI Cable HDMI IN HDMI OUT (TV-ARC) 1. Connect an HDMI cable from the HDMI OUT (TV-ARC) jack on the back of the product to the HDMI IN jack on your TV.
3. Press the Anynet+ button on the remote control to toggle the Auto Power Link function on and off. ● Depending on the connected device, Auto Power Link may not function. TV SOUNDCONNECT You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV SoundConnect function. Connect 1.
CONNECTIONS ● The TV SoundConnect (SoundShare) function is supported by some Samsung TVs released from 2012 on. Check whether your TV supports the TV SoundConnect (SoundShare) function before you begin. (For further information, refer to the TV’s user manual.). ● If your Samsung TV was released before 2014, check the SoundShare setting menu.
CONNECTIONS OPTICAL OR ANALOG AUDIO CABLE This unit comes equipped with one digital optical in jack and one analog audio (AUX) in jack, giving you two ways to connect it to external devices. Audio Cable (not supplied) AUX OUT AUX IN Optical Cable (not supplied) BD / DVD player /...
FUNCTIONS FUNCTIONS INPUT MODE button on the main unit’s top panel or the SOURCE button on the remote control to select the mode Press the you want. Input mode Display Optical Digital input D.IN ARC (HDMI OUT) input AUX input HDMI HDMI input BLUETOOTH mode...
• The device name can only be displayed in English. An underline " _ " will be displayed if the name is not in English. • If the Bluetooth device has failed to pair with the Soundbar, delete the previous "[Samsung] HW-Jxxxx" found by the Bluetooth device and have it search for the Soundbar again.
Page 25
● You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function. ● Once you have paired the Soundbar to a Bluetooth device, selecting "[Samsung] HW-Jxxxx" from the device's scanned devices list will automatically change the Soundbar to BT mode.
To use the Soundbar with the Samsung Multiroom App, you must download and then install the Samsung Multiroom App on your smart device. You can download the app from Google Play or the App Store. With the Samsung Multiroom App installed, you can play music on your Soundbar that is stored on your smart device, located on other connected devices, provided by other content providers, or streamed from Internet radio stations.
Page 27
To launch the Samsung Multiroom app, tap the Multiroom app icon on your smart device. CONNECTING THE SOUNDBAR TO YOUR NETWORK On your smart device, select the Samsung Multiroom app. Follow the directions on your smart device’s screen. You can use the following music sources with the Samsung Multiroom app.
Soundbar via Bluetooth or Wi-Fi. If you turn the Soundbar on via a Bluetooth connection, its input mode is set to BT automatically. To turn the Soundbar on via Wi-Fi, you must have the Samsung Multiroom App installed on your smart device.
+ Updating Procedure 1. Follow the steps below to download the product software: Go to the Samsung website at (samsung.com/sec) search for the model name - select the customer support option (the option name is subject to change) 2. Save the downloaded software to a USB stick and select "Extract to the folder name" to unzip the folder.
Page 30
FUNCTIONS + If UPDATE was not displayed 1. Turn off the Soundbar, connect the USB storage device that contains update files to the Soundbar’s USB port. 2. Disconnect the power cord, reconnect it, and then turn on the Soundbar. ● Insert a USB device containing the firmware update into the USB port on the main unit. ●...
The TV SoundConnect (TV pairing) failed. • Does your TV support TV SoundConnect? ¼ TV SoundConnect is supported by some Samsung TVs released from 2012 on. Check your TV to see if it supports TV SoundConnect. • Is your TV firmware the latest version? ¼...
Design, specifications and App screen are subject to change without prior notice. Nominal specification Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. Weight and dimensions are approximate. For more information about the power supply and power consumption, refer to the label attached to the product.
Page 33
Para evitar cualquier avería o daños, lea detalladamente este manual de instrucciones antes de conectar y utilizar este aparato. Conserve el manual para referencia futura. (Sólo México) Imagine las posibilidades Gracias por adquirir este producto Samsung. Para recibir un servicio más completo, registre su producto en www.samsung.com/register...
Page 34
INTRODUCCIÓN introducción INFORMACIÓN DE SEGURIDAD ADVERTENCIAS DE SEGURIDAD PARA REDUCIR EL PELIGRO DE DESCARGA ELÉCTRICA, NO RETIRE LA TAPA (NI LA PARTE TRASERA). NO CONTIENE ELEMENTOS QUE DEBA REEMPLAZAR EL USUARIO. EN CASO DE AVERÍA, SOLICITE LA AYUDA DE PERSONAL ESPECIALIZADO. Este símbolo indica la presencia de alto voltaje en el interior.
Page 35
INTRODUCCIÓN PRECAUCIONES 68.6 mm 99.1mm 99.1mm 99.1mm Asegúrese de que la toma de CA de su casa cumpla con los requisitos indicados en la pegatina de identificación de la parte posterior del producto. Instale el producto horizontalmente, sobre una base adecuada (mueble), con espacio suficiente a su alrededor para ventilación 7~10 cm.
Page 36
INTRODUCCIÓN ÍNDICE INTRODUCCIÓN 23 FUNCIONES Información de seguridad Modo de Entrada Componentes Bluetooth Uso de la aplicación Multiroom DESCRIPCIÓN Utilización de la función Network Standby On Panel Superior/Frontal Actualización de Software Panel Posterior/Inferior Mando a distancia 31 SOLUCIÓN DE PROBLEMAS 10 INSTALACIÓN Solución de problemas Instalación de la Soundbar...
Page 37
INTRODUCCIÓN COMPONENTES ANTES DE LEER EL MANUAL DEL USUARIO Tenga en cuenta lo siguiente antes de leer el manual del usuario. + Iconos que se utilizarán en el manual Icono Término Definición Indica una situación en la que la función no está operativa o pueden cancelarse los Precaución ajustes.
Page 38
DESCRIPCIÓN descripción PANEL SUPERIOR/FRONTAL VOL. - / + Botón (Alimentación) Controla el nivel del volumen. Aparece valor numérico del nivel de Enciende y apaga la unidad Soundbar. volumen en la pantalla del panel frontal. Botón (Fuente) Pantalla Selecciona la entrada D.IN, AUX, HDMI, Muestra el modo actual.
Page 39
Soundbar a su conectar la Soundbar a software del producto Conecte el adaptador de red utilizando la Samsung HUB (se compra a través del puerto alimentación de CC a la toma configuración de Wi-Fi. por separado) o a una red.
(Por defecto : Auto Power Link OFF, ON - ANYNET+ / OFF - POWER LINK u OFF - ANYNET+ / ON - POWER LINK). La función Anynet+ permite controlar la Soundbar con el mando a distancia desde un TV Samsung compatible con Anynet+. La Soundbar debe conectarse al TV a través de un cable HDMI.
Page 41
DESCRIPCIÓN Alimentación Enciende y apaga la unidad Soundbar. Volumen Ajusta el nivel de volumen de la unidad. Reproducir/Pausa Presione el botón p para detener temporalmente la reproducción del archivo. Presione de nuevo el botón p para reproducir el archivo seleccionado. Salto atrás Cuando hay dos o más archivos en el dispositivo que está...
Page 42
INSTALACIÓN INSTALACIÓN INSTALACIÓN DE LA SOUNDBAR INSTALACIÓN DEL SOPORTE DE PARED + Precauciones en la instalación ● Se instala sólo en una pared. ● En la instalación, evite lugares con altas temperaturas o humedad o paredes que no soporten el peso del equipo. ●...
Page 43
INSTALACIÓN 1. Coloque la Barra de sonido como se muestra en la ilustración, asegurándose de que ninguno de los botones toque la superficie sobre la que descansa. 2. Si el Pie de soporte (3) y el Soporte de sujeción (2) están colocados, retírelos. Pie de soporte Soporte de sujeción 3.
Page 44
INSTALACIÓN Pared 4. Inserte los Tornillos de montaje en la pared de a uno en los 3 orificios para fijar el Soporte de montaje en la pared en la pared. ● Tornillo recomendado: M5 5. Coloque la Soundbar en el Soporte de montaje en la pared siguiendo la siguiente ilustración (1 2).
Page 45
INSTALACIÓN 6. Fije la Fijación de soporte para pared (para montaje en pared) para unir el Soporte de montaje en la pared con la Soundbar. ● No se incluyen los Tornillos de montaje en la pared. ● Debido a que se necesitan diferentes tornillos de montaje en la pared según la pared, antes de la instalación debe controlar su pared y comprar los tornillos de montaje en la pared adecuados para usar.
Page 46
INSTALACIÓN COLOCACIÓN DE LA SOUNDBAR EN UN SOPORTE PARA TV Coloque la Soundbar en un soporte para TV. Compruebe los accesorios suministrados que se incluyen a continuación. Pie de soporte : 3 Tornillo de sujeción 2 : 3 1. Coloque la Soundbar como se muestra en la ilustración y asegúrese de que ninguno de los botones toque la superficie sobre la que se encuentra.
Page 47
INSTALACIÓN 3. Retire el Soporte de sujeción (2) de la Soundbar como se muestra en la ilustración. 4. Alinee el centro de la Barra de sonido con el centro de la base del TV e insértela con mucho cuidado en la base todo lo posible, como se muestra en la ilustración.
Page 48
INSTALACIÓN INSTALACIÓN DE LA SOUNDBAR COMO UNA UNIDAD INDEPENDIENTE 1. Centre la Barra de sonido en la zona plana situada frente al TV. MONTAJE DE LA ABRAZADERA DE CABLES Abrazadera de cables Coloque la abrazadera de cables en la unidad de la forma mostrada y, a continuación, inserte los cables a través de la misma para mantenerlos ordenados.
Page 49
CONEXIONES conexiones ● No conecte el cable de alimentación de este producto del TV a la toma de corriente hasta realizar todas las conexiones entre componentes. ● Antes de trasladar o instalar este producto, asegúrese de apagar y desconectar el cable de alimentación. CONEXIÓN DEL SUBWOOFER CONEXIÓN AUTOMÁTICA AL SUBWOOFER El ID de vinculación del subwoofer viene configurado de fábrica y la unidad principal y el subwoofer deben vincularse...
Page 50
CONEXIONES ● Antes de trasladar o instalar el producto, asegúrese de apagar y desconectar el cable de alimentación. ● Si la unidad principal está apagada, el subwoofer inalámbrico estará en modo de espera y el LED STANDBY de la parte frontal parpadeará en rojo directamente. (No el LED azul). ●...
Page 51
CONEXIONES CONEXIÓN A UN TV ● Importante: Antes de comenzar, coloque la pila en el control remoto. Consulte la página 9 para obtener las instrucciones. CONEXIONES CON EL TV UTILIZANDO UN CABLE HDMI (DIGITAL) Cable de HDMI HDMI IN HDMI OUT (TV-ARC) 1.
Page 52
3. Presione el botón Anynet+ del mando a distancia para activar y desactivar la función Auto Power Link. ● Según el dispositivo conectado, es posible que Auto Power Link no funcione. TV SOUNDCONNECT Puede disfrutar del sonido del TV a través de la Soundbar conectada a un TV Samsung compatible con la función TV SoundConnect. Conectar 1.
Page 53
(Para obtener información adicional, consulte el manual de usuario del TV.) ● Si su TV Samsung se comercializó antes de 2014, compruebe el menú de ajustes de SoundShare. ● Si la distancia entre el TV y la Soundbar supera los 10 m, es posible que la conexión no sea estable o el sonido se interrumpa.
Page 54
CONEXIONES CABLE DE AUDIO ÓPTICO O ANALÓGICO Esta unidad viene equipada con una toma de entrada óptica digital y una toma de entrada de audio analógico (AUX), lo que le permite conectar dispositivos externos de dos maneras diferentes. Cable de Audio (no suministrado) AUX OUT AUX IN...
Page 55
FUNCIONES funciones MODO DE ENTRADA del panel superior de la unidad principal o el botón SOURCE del mando a distancia para Presione el botón seleccionar el modo que desee. Modo de entrada Pantalla Entrada digital óptica D.IN Entrada ARC (HDMI OUT) Entrada AUX HDMI Entrada HDMI...
Page 56
• El nombre del dispositibo no puede mostrar caracteres especiales. Aparecerá un signo de subrayado " _ " si el nombre tiene caracteres especiales. • Si el dispositivo Bluetooth no se empareja con Soundbar, borre el "[Samsung] HW-Jxxxx" anteriormente encontrado por el dispositivo Bluetooth y realice una búsqueda de Soundbar de nuevo.
Page 57
● No puede conectar la Soundbar a un dispositivo Bluetooth que admita solo la función HF (manos libres). ● Una vez que haya emparejado la Barra de sonido a un dispositivo Bluetooth, si selecciona "[Samsung] HW-Jxxxx" en la lista de dispositivos explorados, cambiará automáticamente la Barra de sonido al modo BT.
USO DE LA APLICACIÓN MULTIROOM La aplicación Samsung Multiroom le permite conectar la Soundbar a un dispositivo inteligente, a su red y a Internet. Una vez que la Soundbar está conectada a un dispositivo inteligente que tiene la aplicación Multiroom instalada, también puede conectar la Soundbar y varios dispositivos con Samsung Multiroom de forma inalámbrica para...
Page 59
FUNCIONES + Inicio de la aplicación Samsung Multiroom Para iniciar la aplicación Samsung Multiroom, toque el icono de la aplicación Multiroom en su dispositivo inteligente. CONEXIÓN DE LA SOUNDBAR A LA RED En el dispositivo inteligente, seleccione la App Samsung Multiroom. Siga las directrices de la pantalla del dispositivo inteligente.
Page 60
Soundbar a través de Bluetooth o Wi-Fi. Si se enciende la Soundbar a través de la conexión Bluetooth, su modo de entrada se establece automáticamente en BT. Para encender la Soundbar a través de Wi-Fi, debe tener la aplicación Samsung Multiroom instalada en su dispositivo inteligente. 1. Conecte el dispositivo inteligente a su Soundbar.
Page 61
1. Siga los siguientes pasos para descargar el software del producto: Visite el sitio web de Samsung en (samsung.com/sec) busque el nombre del modelo y seleccione la opción de soporte técnico (el nombre de la opción está sujeto a cambios).
Page 62
FUNCIONES + Si no aparece UPDATE 1. Apague la Soundbar, conecte el dispositivo de almacenamiento USB que contiene archivos de actualización al puerto USB de la Soundbar. 2. Desconecte el cable de alimentación, vuelva a conectarlo y enciéndalo. ● Inserte en el puerto USB de la unidad principal un dispositivo USB que contenga la actualización del firmware.
Page 63
Fallo en TV SoundConnect (emparejamiento del TV). • ¿Es su TV compatible con TV SoundConnect? ¼ TV SoundConnect es compatible con algunos TVs Samsung comercializados a partir de 2012. Compruebe el TV para ver si es compatible con TV SoundConnect.
Page 64
El diseño, las especificaciones y la pantalla de la App están sujetos a cambio sin previo aviso. Especificación nominal Samsung Electronics Co., Ltd se reserva el derecho a cambiar las especificaciones sin previo aviso. Los pesos y dimensiones son aproximados.