FAAC 450 MPS Installation Instructions Manual
  1. Manuals
  2. Brands
  3. FAAC Manuals
  4. Control Panel
  5. 450 MPS Control Panel
  6. Installation instructions manual

FAAC 450 MPS Installation Instructions Manual

Hide thumbs Also See for 450 MPS:

Advertisement

Table of Contents

See also: Installation Manual
450 MPS
450 MPS
UNI EN ISO 9001-085

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 450 MPS and is the answer not in the manual?

Questions and answers

Related Manuals for FAAC 450 MPS

Summary of Contents for FAAC 450 MPS

  • Page 1 450 MPS 450 MPS UNI EN ISO 9001-085...
  • Page 2 17) Each installation must be fitted with at least one flashing light (e.g. FAAC LAMP, MINILAMP etc.) as well as a warning plate suitably fixed to the gate, besides the safety devices as per point 16. above.
  • Page 3 ENGLISH DESCRIPTION AND TECHNICAL SPECIFICATIONS LAYOUT AND ELECTRICAL WIRING Table 1: 450 MPS Control unit technical specifications Power supply 230 V(+6%-10%) - 50 Hz Absorbed power 10 W Max. motor load 800 W Max. accessories load 0,5 A Max. electric lock load...
  • Page 4 (fig. 3). the zone behind the gate leaves (A, fig. 3). The 450 MPS card has an additional FAIL-SAFE device which CL. - Closing safety device contact (N.C.): in the A-S-E-EP-AD serves to check that the N.C. contact on the photocell...
  • Page 5 ENGLISH Application examples The following are the commonly used connection arrangements (disable fail -safe) One pneumatic edge connected as closing safety device and No safety device connected one connected as opening safety device 14 15 14 15 — — OP — CL OP —...
  • Page 6 + – Warning lamp power supply 24 Vdc 3 W max. For correct operation of the system, do not exceed stated power (see table 2). 450 MPS LOCK 12 Vac electric lock power supply. J4 quick connector for decoder SL/DS - MINIDEC SL/DS - RP DECODER 433 SL/DS cards (figs.
  • Page 7 Fig. 15 of the leaf driven by motor M1 (see fig. 2) to ensure correct closure of the gate. Set the delay by the LEAF DELAY trimmer on the 450 MPS control unit (fig. 1 - ref. 8). REVERSING STROKE FOR OPERATING LOGICS To reduce delay time, adjust the trimmer anticlockwise.
  • Page 8 ENGLISH...
  • Page 9 ENGLISH...
  • Page 10 Le descrizioni e le illustrazioni del presente manuale non sono impegnative. La FAAC si riserva il diritto, lasciando inalterate le caratteristiche essenziali dell’apparecchiatura, di apportare in qualunque momento e senza impegnarsi ad aggiornare la presente pubblicazione, le modifiche che essa ritiene convenienti per miglioramenti tecnici o per qualsiasi altra esigenza di carattere costruttivo o commerciale.

Table of Contents

Save PDF