Related Manuals for XPower XD-125
Summary of Contents for XPower XD-125
- Page 1 XPOWER MANUFACTURE, INC. 220 Clary Ave., San Gabriel, CA 91776 PH: 626-285-3301 FAX: 626-285-3302 Email: info@xpower.ws Website: xpower.ws COMMERCIAL DEHUMIDIFIER XD-125 OWNER’S MANUAL PLEASE READ AND SAVE THESE INSTRUCTIONS...
-
Page 2: Table Of Contents
Table of Contents INTRODUCTION ................................2 SAFETY INSTRUCTIONS..............................3 ASSEMBLY & PARTS ..............................4 SET UP/OPERATION ..............................5 CONTROL PANEL ................................6 CARE & MAINTENANCE ..............................7 - Cleaning the Air Filter .............................7 - Replacing the Battery .............................7 TROUBLESHOOTING ..............................8 APDS-I...................................9 WARRANTY ................................10... -
Page 3: Introduction
INTRODUCTION The XPOWER XD-125 dehumidifier is a professional drying tool designed to maximize water extraction in a variety of temperature and humidity conditions. Perfect for water damage restoration jobs as well as other industrial applications; the XD-125 offers programmable humidity for optimal environment control. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS WARNING! - TO REDUCE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS OR PROPERTY: 1. Always operate the product from a power source of the same voltage, frequency and rating as indicated on the product identification plate. 2. -
Page 5: Assembly & Parts
ASSEMBLY & PARTS 1. Your XD-125 Dehumidifier is fully assembled with the exception of the handle 2. Using a Phillips screwdriver, loosely attach each screw to unit. DO NOT TIGHTEN until all six screws have been fastened. (*You will experience some resistance as screws fit into housing). -
Page 6: Set Up/Operation
SET UP/OPERATION READ ALL INSTRUCTIONS TO PREVENT SYSTEM DAMAGE For proper operation, DO NOT obstruct the air inlets/outlets, or drainage hose. WAIT 30 minutes after transporting unit to jobsite before switching ON to allow refrigerant system to stabilize ... -
Page 7: Control Panel
CONTROL PANEL 1. POWER (ON/OFF) 2. DISPLAY 3. UP AND DOWN CONTROLS 4. PURGE 5. TIME ON/OFF: Power button turns the unit ON or OFF 2. DISPLAY: Left hand side indicates adjustable preferred humidity level, right side indicates current humidity. See #5 for reading time. Set to adjust humidity ranging from 90% to 26%. -
Page 8: Care & Maintenance
CARE & MAINTENANCE Cleaning the Air Filter Regular cleaning of filters is highly recommended. The performance of the dehumidifier will be greatly reduced if the filters become blocked. 1. Confirm the dehumidifier is turned OFF and the plug is disconnected from power outlet Remove the filter as shown in the diagram. -
Page 9: Troubleshooting
TROUBLESHOOTING WARNING! UNPLUG & POWER OFF BEFORE PERFORMING ANY MAINTENANCE PROBLEM CAUSE SOLUTION No power to appliance Check connection to power source. “Running” indicator light Dehumidifier does not operate should flash green if unit is connected to a functional power source. -
Page 10: Apds-I
APDS-I (sold separately) Uses combined power of XPOWER Air Scrubber (X-3500) and Dehumidifier to remove moisture and contaminants from the air. (ASK125) (X-3500) (8DH15) Air System Adapter Ducting Hose Air Scrubber... -
Page 11: Warranty
The end user will be responsible to ship the unit (with the RMA number showing on the shipping label) to the XPOWER Service Department. Upon inspection, we will advise you of the repairs needed and the cost (if applicable). XPOWER will provide repair or replacement parts depending on warranty.
Need help?
Do you have a question about the XD-125 and is the answer not in the manual?
Questions and answers