Unboxing Your Phone; Getting To Know Your Phone; Inserting A Sim Card And Microsd Card - Huawei MATE 9 Use Manual

Unboxing your Phone

Getting to know your phone

microphone
Do not cover the light sensor, as this may affect some of the phone's functions. When using
a screen protector, ensure that it has a purpose-built cutout for the light sensor.

Inserting a SIM card and microSD card

Your phone's 2-in-1 card slot is located on the upper-left side of the phone. You can insert 2
nano-SIM cards, or 1 nano-SIM card and 1 microSD card.
Your phone only supports nano-SIM cards. If necessary, contact your carrier for a new or
l
replacement nano-SIM card.
Only use standard nano-SIM cards to avoid damaging the SIM card tray.
l
Ensure that the card is in the correct position and keep the card tray level when inserting it into
l
your phone.
Be careful not to hurt yourself or damage your phone when using the SIM eject pin.
l
Store the SIM eject pin out of the reach of children to prevent accidental swallowing or injury.
l
1
Press and hold the power button, and then touch
2
To remove the card tray, insert the SIM eject pin included with your phone into the small hole
next to the card tray.
Secondary
microphone
Earpiece
Headset
jack
SIM tray
Main
Proximity sensor
Infrared sensor
Dual-tone flash
Status indicator
Front camera
Ambient light
sensor
Volume button
Power button
Main
microphone
USB-Type
C port
to turn off your phone.
Secondary
microphone
Dual-lens
camera
Laser sensor
Fingerprint
sensor
2