Advertisement
Quick Links
COONARA "CHATEAU"
SERIES 2
HIGH EFFICIENCY GAS LOG SPACE HEATER
CUSTOMER OPERATING INFORMATION
&
INSTALLATION INSTRUCTIONS
Serial Number of Heater: ____________ Model: ___________________
CHATEAU Series 2 Gas Heaters
ARE AUSTRALIAN OWNED & MANUFACTURED BY
Serial Number of Heater: ____________ Model: ___________________
SHAMIC SHEETMETAL
SHAMIC SHEETMETAL
SHAMIC SHEETMETAL
SHAMIC SHEETMETAL
(AUST.) PTY. LTD.
PO BOX 8, KILSYTH, VIC. 3136
PH: 03 9737 5300 FAX: 03 9761 6455
https://shamic.com
Revised: 13/10/2015
PPPrintew
- 1 -
Printed: 14/10/2015
1 of 19
- 1 -
Advertisement
Related Manuals for Coonara chateau 2 series
Summary of Contents for Coonara chateau 2 series
- Page 1 COONARA “CHATEAU” SERIES 2 HIGH EFFICIENCY GAS LOG SPACE HEATER CUSTOMER OPERATING INFORMATION & INSTALLATION INSTRUCTIONS Serial Number of Heater: ____________ Model: ___________________ CHATEAU Series 2 Gas Heaters ARE AUSTRALIAN OWNED & MANUFACTURED BY Serial Number of Heater: ____________ Model: ___________________...
- Page 2 WARNING THE FOLLOWING INSTRUCTIONS MUST BE CARRIED OUT OR WARRANTY BECOMES VOID. Heater must be installed by an authorized person. You must obtain a license number from the installer. Heater must be placed on a flat level surface. Inbuilt models must be placed on AC sheeting, to prevent unit from rattling.
- Page 3 ONTENTS PRODUCT FEATURES SAFETY PRECAUTIONS _________________________________5 CUSTOMER OPERATING INSTRUCTIONS SAFETY PRECAUTIONS SAFETY FEATURES INSTALLATION INSTRUCTIONS 9-12 LOG INSTALLATION & WIRING DIAGRAM GAS VALVE ADJUSTMENT TROUBLESHOOTING GUIDE DIMENSIONS & WARRANTY 16-17 CARE OF APPLIANCE SERVICE CONTACT INFORMATION Revised: 13/10/2015 PPPrintew - 3 - Printed: 14/10/2015 3 of 19 - 3 -...
- Page 4 Delayed stop room fan - aids cool down of unit when switched off. Power flue. Integrated safety features. The Coonara “Chateau” Series 2 Inbuilt model is approved by the Australian Gas Association to AS 4553- 2008 for gas space heating appliances. AGA Approval No. 6165...
- Page 5 This appliance shall only be installed in accordance with: AS/NZS 5601 (Gas Installation Standard), Manufacturer’s Installation Instructions, Local Gas Fitting Regulations, Municipal Building Codes. This appliance must only be installed and serviced by an authorised person Please store this manual in a safe place for future reference Revised: 13/10/2015 PPPrintew - 5 -...
-
Page 6: Safety Precautions
DO NOT – MODIFY THIS APPLIANCE. DO NOT – PLACE ANY ITEM CONTAINING LIQUID ON THE APPLIANCE Note: In the event that the electricity supply cord is damaged it must be replaced with Coonara part # 6306, obtainable from authorised gas retailers. - Page 7 USTOMER PERATING NSTRUCTIONS The Coonara “Chateau” Series 2 Gas Log Space Heater has been designed for simple efficient operation. PERATION HECKS Prior to operating the heater, ensure that the flue terminal is not obstructed. Make sure there are no combustible objects leaning against the unit or resting on or within the immediate vicinity of the unit. Check that the heater main power and gas supply are connected and switched on.
- Page 8 SAFETY FEATURES Automatic Shut-Off: Should the flame extinguish for any reason, there is an automatic close off of the gas supply. Note: fans will continue to operate as normal. Over Temperature Protection: In the event of the room fan failing, blockage of airways, or incorrect gas installation, the gas supply will be automatically closed off to prevent the appliance over-heating.
- Page 9 WARNING Heater must be checked for scratches or dents prior to installation. Once the Heater is installed scratches or dents are not covered by warranty. Must be placed on a flat level surface to prevent rattles. INSTALLATION Inbuilt Model Only to be carried out by an authorised person! 1.
- Page 10 INBUILT MODEL Rear vent Flue Installation 1. Determine the exact location for the heater. 2. Mark the exact location for the wall penetration a. Determine that you will not be cutting through any vertical wall studs. b. Check that the location of the wall-mounted terminal conforms to the requirements of AS/NZS 5601 –...
- Page 11 Fig 1: Rear of heater showing exact location of flue (shown from rear). Installation in a Stud wall cavity. 1. Mark the exact location of where the heater is to be located with an outline 720mm wide by 615mm high 2.
- Page 12 Installation through the wall. 1. Mark the exact location of where the heater is to be located with an outline 720mm wide by 615mm high. 2. Check that location for the flue terminal conforms to the requirements of AS/NZS 5601 location of a Flue Terminal. 3.
-
Page 13: Wiring Diagram
NSTALLATION OF 1. Place the rear log on the rear of the burner plate as shown. 2. Place front log on the front section of the burner. 3. Fit the cross logs (as illustrated below) to the pins located on the front and rear logs 4. - Page 14 CHATEAU GAS VALVE SIT 843 “A” represents the low gas adjustment. Turn the screw clockwise to increase gas pressure. “B” represents the high gas adjustment. Turn the nut clockwise to increase gas pressure. Natural Gas Burner test point pressure – HIGH 1.0 kPa, LOW 0.48 kPa Primary air shutter adjustment –...
- Page 15 ROUBLESHOOTING UIDE PROBLEM POSSIBLE CAUSE REMEDY Appliance fails to No gas or supply pressure insufficient. Ensure gas supply connected, purged, and pressure ignite. appropriate. No electrical supply. Ensure unit plugged in and switch is on, check supply fuse. Incorrectly wired power point. Check supply.
- Page 16 (2) years from date of purchase, excluding door glass and decorative logs. 3) If this Coonara heater is found to be defective in material or workmanship Shamic will repair or replace such defects in the Coonara heater at Shamic’s option in accordance with Coonara’s warranty policy during the period on this warranty.
- Page 17 Coonara heater. Whether such damage occurs or is discovered before or after replacement or repair, and whether or not such damage is caused by Coonara negligence.
- Page 18 Revised: 13/10/2015 PPPrintew - 18 - Printed: 14/10/2015 18 of 19 - 18 -...
- Page 19 For your nearest authorised service company, please contact: SHAMIC SHEETMETAL SHAMIC SHEETMETAL SHAMIC SHEETMETAL SHAMIC SHEETMETAL (AUST.) PTY. LTD. HEAD OFFICE: 14 – 18 Research Drive, CROYDON SOUTH, VIC. 3136 POSTAL ADDRESS: P.O. Box 8, KILSYTH, VIC. 3137 Phone: (03) 9737 5300 Fax: (03) 9761 6455 Email: info@shamic.com.au...
Need help?
Do you have a question about the chateau 2 series and is the answer not in the manual?
Questions and answers