Power Draft Blowers; Key Operation; Powering Up - BBQ Guru DigiQ DX2 User Manual

5. POWER DRAFT BLOWERS

All blowers are equipped with an adjustable damper and an aluminum nozzle. The blower housing is constructed of
stainless steel for a clean, durable, and long lasting finish.
The slide damper can be completely closed to kill the fire or can be adjusted to a small opening for cold smoking. This
feature allows fine adjustments to be made due to natural drafts that effect cooking temperature during the blower's off
cycle. Testing on different settings is recommended. Open the damper fully for quick start up or grilling at high
temperatures. Close half way for smaller cookers or low and slow cooking. Close three-quarters of the way for cold
smoking.

6. KEY OPERATION

FOOD – shows the food temperature when pressed
PIT – shows the pit temperature when pressed
UP – indexes the setpoint up
DOWN – indexes the setpoint down
FOOD + PIT – powers the unit on or off when both buttons are held
UP + DOWN – enters the setup menu when both buttons are held
PIT + UP – invokes the Scan Mode
PIT + DOWN – invokes the Diagnostic Mode
KEY PRESS CHIRP
When the beeper intensity is set to above 0, any key press will cause an acknowledge chirp. Setting the Beeper Intensity in
the menu to 0 will disable the chirp.
SILENCING THE BEEPER WITH ANY KEY PRESS
Any time the beeper is sounding, press any key to silence it and clear the alarm condition. To turn the beeper off, set the
Beeper Intensity in the menu to 0.

7. POWERING UP

Upon applying power, the DigiQ will show to test the display and then shows the version number.
If there is a brief or sustained power interruption at any time while cooking, the DigiQ will automatically restart and
continue to control the pit at the same settings that were originally set.
5