Summary of Contents for Swingline Stack-and-Shred 100X
Page 1
http://www.monomachines.com/ STACK-AND-SHRED100X&10 0M ™ S H R E D D E R S For More Info Click Here ---> start here http://www.monomachines.com/...
Page 5
http://www.monomachines.com/ STACK-AND-SHRED100X & 100M ™ S H R E D D E R S instruction manual English For More Info Click Here ---> http://www.monomachines.com/...
http://www.monomachines.com/ English autofeed technology The Stack and Shred 100X/100M has been designed to automatically shred up to 100 sheets from the auto-feed chamber and up to 6 sheets through the manual feed slot. The auto-feed mechanism has been designed to handle paper fastened with staples and paper clips and to only pull a few sheets of paper into the cutting mechanism to minimise the risk of paper jams.
This means no oil lubrication, This means don’t reach into the use Swingline oil sheets only. feed opening of the cutting head. control panel and indicators Reverse Auto...
Page 8
http://www.monomachines.com/ English Stack and Shred 100X/100M shredding capability Stack and Shred 100X/100M CAN shred the following: • 100 sheets • Stapled paper, 25mm within the corner • 26/6 and 24/6 or smaller staples • Small sized paper loaded centrally • 100 sheets •...
Stack and Shred 100X and 100M can shred credit cards, not CDs or DVDs. Switch the shredder to auto mode and insert the credit card into the opening on top of the manual feed entry slot. Swingline encourages customers to recycle shredded paper. Please note that shredded paper can not be recycled if mixed with credit card shards.
Page 10
Do not directly oil the shredder. service We recommend these machines are serviced every 6 to 12 months by a Swingline service engineer – see back of this booklet for the contact details of your local service centre and for enquiries about maintenance contracts.
Limited 2 year Cutter Warranty for Stack and Shred 100X/100M Shredder and Limited 2 Year Warranty for all other Parts (each, respectively, “ACCO Brands”) warrants to the original purchaser that the cutters of this Swingline™ Stack and Shred 100X/100M Shredder are free from defects in workmanship and material under normal use and service for a period of 2 years after purchase and all other parts are free from defects in workmanship and material under normal use and service for a period of 2 years after purchase.
Need help?
Do you have a question about the Stack-and-Shred 100X and is the answer not in the manual?
Questions and answers