Printing, Exporting, And Deleting Images And Clips - FujiFilm SonoSite Edge II User Manual

3 Select x/x to cycle to the image or clip you want to review.
4 (Clip Only) Select Play. The clip plays automatically after loading. The load time depends on clip length.
Note
5 Select x/x to cycle to the next image or clip you want to view.
To return to the patient list, select List.
To return to imaging, select Done.

Printing, exporting, and deleting images and clips

WARNINGS
To print an image
1 Verify that a printer is selected. See
2 Do one of the following:
In the patient list, review the patient's images. Select Print when the image appears.
With the image displayed, press the A shortcut key. By default, the A shortcut key prints. To reprogram
the A and B shortcut keys, see
To print multiple images
1 Verify that a printer is selected. See
2 Do one of the following:
Print all images for multiple patients: Select one or more patients in the patient list. Then select Print.
Print all images for one patient: Highlight the patient in the patient list, and then select Print.
Each image appears briefly on-screen while printing.
Images and clips
You can select Pause to freeze the clip and can select a playback speed
2x, 1/4x.
To avoid damaging the USB storage device and losing patient data from it,
observe the following:
Do not remove the USB storage device or turn off the ultrasound system while
the system is exporting.
Do not bump or otherwise apply pressure to the USB storage device while it is
in a USB port on the ultrasound system. The connector could break.
"To configure the system for a printer"
"Presets setup"
"To configure the system for a printer"
on page 33.
on page 28.
on page 28.
1x, 1/
63