Summary of Contents for JML uber scoot S300
- Page 1 USER MANUAL READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE RIDING SUITABLE FOR AGES 13+ NOTE: Product images are for demonstration purposes only and may not re ect exact appearance of actual product. Speci cations subject to change without notice.
- Page 2 Make sure to familiarise yourself with the tra c rules and regulations in your area to determine where it is safe for you to ride your scooter. This is not a toy. Riding the UBER SCOOT S300 can result in serious injury or even death regardless of the ability of the rider, any factory fault, any precautions taken or conditions in which they (the rider) were riding in.
-
Page 3: Installing The Handlebar
FAMILIARISING YOURSELF WITH YOUR UBER SCOOT S300 Throttle Handlebar tightening knob Hand-operated rear brake Handle stem Brake caliper 300W Motor Foot stand Fuse/Reset Rear wheel On/O switch 10. Rechargeable 24V Battery 11. Fold mechanism Front wheel INSTALLING THE HANDLEBAR Installation requires adult supervision. To dismantle the scooter, ensure the power is o . -
Page 4: Disposal And The Environment
After the rst charge, charge your UBER SCOOT S300 until the green light appears (this means that your scooter is fully charged). The UBER SCOOT S300 may be left charging for up to 5 hours. Do not exceed this period as your batteries may su er irreparable damage and this treatment will render your guarantee void. -
Page 5: How To Brake
FUSE/RESET If your UBER SCOOT S300 happens to suddenly stop working, check the fuse located below the deck on the left-hand side of the scooter above the charging port. The fuse may have shorted if the motor was overloaded. If so, replace the fuse and correct the riding conditions that caused the overload. -
Page 6: Troubleshooting
TROUBLE SHOOTING Problem Possible Cause Solution Scooter does not run Undercharged battery Ensure that your scooter is fully charged. The rst charge should not be longer than 12 hours and subsequent charges should not be more than 5 hours Check all connectors. If charging, make sure that the charger is correctly connected to the charging port, and that there is power to the charger Scooter suddenly... -
Page 7: Battery Disposal
BATTERY DISPOSAL Please ensure that your sealed lead-acid batteries are disposed of in an environmentally friendly manner. Hazardous materials such as lead, acid and plastic can cause harm to the environment. Do not expose batteries to re as they may leak or explode and may injure those close by and/or cause damage to nearby surroundings. - Page 8 Distributed by JML Unit 1 Eastside, Port of Tyne, South Shields, NE33 5SP Customer Services: UK: 0800 781 7831 (Freephone) ROI: 041-978 0003 (Local rate) Email: info@JMLgroup.co.uk • Web: www.JMLdirect.com ©JohnMillsLtd/PF/08.16/TO/A • Product code: V2143 • Made in China Model no: S300/ES04 • Batch no: XXXX...
Need help?
Do you have a question about the uber scoot S300 and is the answer not in the manual?
Questions and answers
Que tipo de fusible usa
The JML Uber Scoot S300 uses a Glass Fuse 40A 250V.
This answer is automatically generated