Table of Contents

Advertisement

Care & Cleaning
Before you lift or reposition your IWB, it is better to disconnect the cables and
power cord. Follow the correct lifting techniques when positioning the IWB.
When lifting or carrying the IWB, grasp the edges of the IWB. Do not lift the
display by the stand or the cord.
Cleaning. Turn your IWB off and unplug the power cord. Clean the IWB surface
with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a
cloth dampened with mild cleaner.
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for
use with the IWB. Never spray cleaner directly on the screen, as it may drip
inside the IWB and cause an electric shock.
The following symptoms are normal with the IWB:
You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching in the image. The screen will recover slowly
or you can turn off the Power Switch for hours.
When the screen becomes black or flashes, or cannot work anymore, contact
your dealer or service center to fix it. Do not repair the screen by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when
trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp6540-t

Table of Contents