Table of Contents
Related Manuals for Divine DL-1040 DLX
Summary of Contents for Divine DL-1040 DLX
- Page 1 SPA MANUAL Deluxe Series D E L U X E live better | feel better P.O. Box 2140 | Woodinville, WA 98072 | www.divinehottubsdeluxe.com © June, 2011 | Divine Hot Tubs™ Deluxe | spa manual, US/Canada, Divine Hot Tubs Deluxe 2-1-13...
- Page 2 “We reserve the right to improve our product without notice” ™ Copyright © 1/1/11 Divine Hot Tubs Deluxe (A division of Hydra Plastics, Inc.). All rights reserved. Specifications may change without notice. International products may be configured differently to meet local electrical requirements.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 5 INTRODUCTION 5 ICON Key 6 IMPORTANT SAFETY INSTRUCTIONS 6 Read and Follow All Instructions 8 STEPS FOR A SUCCESSFUL INSTALLATION 8 Delivery 9 Site Selection and Preparation 9 Installation – Placing Your Spa 11 Electrical Hook-Up Requirements 13 Filling Your Spa 14 TOPSIDE CONTROL - TURNING ON YOUR SPA 14 Topside Control Button Reference Display... - Page 4 28 MAINTENANCE 28 Pillows 28 Spa Skirt 28 The Shell 28 Spa Cover 29 Winterizing 30 Draining The Spa 31 Energy Efficiency 32 APPENDIX A 32 Troubleshooting 32 System Trouble 32 Controls 33 Pumps 33 Jets 33 Water 35 Frequently Asked Questions 36 Warranty...
-
Page 5: Introduction
Please feel free to contact Divine Hot Tubs™ Deluxe if you have any further questions after reading this manual. We hope you enjoy many years of fun and relaxation in your new Divine Hot Tubs™... -
Page 6: Important Safety Instructions
SAFETY FIRST IMPORTANT SAFETY INSTRUCTIONS! READ AND FOLLOW ALL INSTRUCTIONS. SAVE THESE INSTRUCTIONS. When installing and using this electrical equipment it is recom- mended that a licensed and bonded electrician perform the work. Basic safety precautions should always be followed, including the Electrical Warning! following:... - Page 7 WARNING PREVENT DROWNING PREVENT ELECTROCUTION 1. SUPERVISE CHILDREN AT ALL TIMES. 1. NEVER PLACE ANY ELECTRIC APPLIANCE 2. ATTACH SPA COVER AFTER EACH USE. WITHIN 5 FEET OF SPA. 3. SPA HEAT CAN CAUSE HYPERTHERMIA AND UNCONSCIOUSNESS. 4. SPA HEAT IN CONJUNCTION WITH ALCOHOL, DRUGS, OR MEDICATION CAN CAUSE UNCONSCIOUSNESS.
-
Page 8: Steps For A Successful Installation
Hot Tub Size of Hot Tub Only Size of Hot Tub on Pallet (Width, Length, Height) (Width, Length, Height) DL-1040 DLX 38" x 92.5" x 92.5" 43.5" 95" 98" (96.5 x 235 x 235 cm) -
Page 9: Site Selection And Preparation
The concrete pad should be four inches thick. All Divine Hot Tubs Deluxe hot tubs may be installed on a deck, providing the load rating can handle a full spa with people in it. -
Page 10: Deck Installation
Deck installation When placing the hot tub on a deck, please ensure the maximum load capacity of the deck. Consult a qualified deck builder or structural engineer before you place the hot tub on an elevated deck or indoors. To de- termine the weight of your hot tub, please refer to the specifications on the website. -
Page 11: Electrical Hook-Up Requirements
SUB PANEL BE USED TO SUPPLY POWER AND PROTECT THE HOT spend on wire. TUB. All 240 volt Divine Hot Tubs™ Deluxe spas must be wired in Wire can become accordance with applicable local electrical codes, and all electrical expensive if you work must be done by a licensed electrician. - Page 12 ELECTRICAL REQUIREMENTS - 240V (cont.) IMPORTANT: Electrical connections must be made by qualified, licensed personnel. Please contact a licensed residential electrician for these services. Figure 1-1 240 volt wiring configuration from the house to the spa...
-
Page 13: Filling Your Spa
5. FILLING YOUR SPA THROUGH THE FILTER CHAMBER IMPORTANT! Before you begin to fill your spa, it is advisable to have your water tested Improperly for hardness (water rich in calcium and mineral content). Wells usually balanced contain harder water than urban water supplies. Mineral and metal im- water may balances in your water can shorten the life of the equipment in your spa. -
Page 14: Topside Control - Turning On Your Spa
Figure 1 6-Button topside control panel Figure 2 7-Button topside control panel TOPSIDE CONTROL – TURNING ON YOUR SPA Topside control button reference display Identify your topside 6-button control (figure 1) or 7-button control (figure 2). After you identified your topside control system, and the spa is filled, turn your power on and go to your controller spa operations. -
Page 15: Preset Filter Cycles
ture button again before the display stops flashing. Each press of “Warm” or “Cool” will adjust the set temperature. After three seconds, the display will stop flashing and begin to display the current spa temperature. Jets 1 Press “Jets 1” to turn pump 1 on or off. The device will turn off after 15 minutes. Jets 2 Press the “Jets 2”... -
Page 16: Diagnostic Messages
Diagnostic messages MESSAGE MEANING ACTION REQUIRED No message on display. The control panel will be Power has been cut off to disabled until power returns. the spa. Settings are preserved until the next power-up. “Overheat” - The spa has Remove the spa cover and shut down. - Page 17 Warning! Shock Hazard! No User Serviceable Parts. Do not attempt service of this control system. Follow all owner’s manual power connection instructions. Installation must be performed by a licensed electrician and all grounding connections must be properly installed. Contact customer service or for assistance. MESSAGE MEANING ACTION REQUIRED...
- Page 18 energy efficient spas engineered with technology SAVE ENERGY | SAVE MONEY | SAVE OUR PLANET...
-
Page 19: Water Purity & Filtration
WATER PURITY & FILTRATION Keeping the water clean – chemical sanitizers One of the bigger reasons that people require service on their spa is because they haven’t followed a chemical application regiment. Water can accumulate impurities that worsen the performance or even damage the filtration system if chemicals are not applied on a regular basis. -
Page 20: Spa Chemistry 101
Spa Chemistry 101 The pH scale At first, trying to understand spa chemistry can seem like a daunt- goes from ing task to say the least. We intend on helping you understand spa 0 to 14, with chemicals so that you can maintain the health of your spa at the best zero being level possible. - Page 21 bromine, which rapidly forms the active sanitizer - hypobromous acid - in spa water. Upon reaction with bacteria and other spa contaminants, hy- pobromous acid is reduced back to bromide ion, ready to be activated again by the next dose of potassium monopersulfate. Potassium monop- ersulfate begins to produce bromine immediately and continues to do so for several hours, providing sufficient time for oxidation of bather waste and other organic contamination such as ammonia and nitrogen.
-
Page 22: How To Use The Chemicals
Water Conditioners FLOCCULENT – A compound which clarifies spa water by gathering oils, dirt, scum, metal deposits and small contaminant particles into larger globules, which then can be easily trapped in the filtering system allowing the filtering system to work more effectively. CLARIFIER –... -
Page 23: Starting A Chemical Maintenance Program
CHLORINATION – To add chlorine to your spa on a regular basis to disin- fect and oxidize your spa water. BREAK POINT CHLORINATION – The process of shocking the water with significant quantities of chlorine to oxidize all contaminants and organic wastes and leave all remaining chlorine as free chlorine. - Page 24 Three main parameters should be tracked closely: ALWAYS 1. pH read the entire 2. Free chlorine label on a 3. Alkalinity chemical container T.D.S. (Total Dissolved Solids) and calcium hardness should be before using. checked after the first three are in the correct range. Test strips and Read all safety test kits come with instructions on how to diagnose readings to precautions...
-
Page 25: Filtration
Ozone Generator Divine Hot Tubs™ Deluxe has an Ozonator made to our specifications. Ozonators supply the spa water with ozone, which is an extremely effective oxidant that will kill bacteria and microorganisms. The Ozonator will distribute ozone into your spa automatically during the filter cycles and will keep your spa and water sparkling clean. -
Page 26: Jets
JETS Types of Jets Your Divine Hot Tubs™ Deluxe spa comes with different types of jets and jet configurations. All jets with the exception of the fixed jets in the foot well by the light are adjustable and can be turned on or off. They all combine to create a luxurious and invigorating hydrotherapy environment that can’t be beat. -
Page 27: Cleaning The Rotating Jets
Jet, air and waterfall controls Jet Controls The button ‘JETS 1’ turns on and off the pump/jets for the lounge. The button ‘JETS 2’ turns on and off the pumps/jets for all the seating area. Waterfall Control Soothing triple waterfall arches are a featured item and are a focal point of beauty and fun. -
Page 28: Maintenance
Spa Skirt Divine Hot Tubs™ Deluxe uses a weather-resistant and impact-resistant material for their exterior cabinetry. This material offers the beautiful look of tongue and groove wood cabinetry and comes pre-stained in the color selections provided by Divine Hot Tubs™... -
Page 29: Winterizing
Winterizing If you live in a climate where winter temperatures are below freezing and power to the spa will be disconnected, follow these procedures for draining: 1. Add an algaecide to the water and run pumps for half an hour to evenly disperse algaecide. WARNING! 2. -
Page 30: Draining The Spa
Draining The Spa We recommend that you drain and clean your spa no more than 3 or 4 times per year, depending on how frequently you use it and how well you maintain your water. In Innermost Middle Outermost most cases this simple process will only closed open closed... - Page 31 Providing a greener spa. Divine Hot Tubs™ Deluxe is strongly commit- ted to protecting the health of our environ- ment and manufacturing energy efficient hot tubs that help to conserve our natural technology resources.
-
Page 32: Troubleshooting
APPENDIX A Troubleshooting For error message on your topside control, see control reference from the Initial Start-up. PROBLEM PROBABLE CAUSE REMEDY GFCI trips (on startup) Improper or defective Electrician should inspect for wiring. wiring mistakes. GFCI trips A) Ozone generator Unplug from controller and defective. -
Page 33: Pumps
Pumps PROBLEM PROBABLE CAUSE REMEDY Noisy pump or motor A) Clogged filter or pump Clean filter, filter basket and inlets. pump inlets B) Low water level. Fill water to fill line on filter door. C) Slice valves not open. Remove service panels and open slice valves. - Page 34 Water (Continued) PROBLEM PROBABLE CAUSE REMEDY Cloudy water A) Clogged or blocked Remove filter and clean fitting. filter fitting. B) Dirty filter. Clean filter. C) Poor water chemistry. Balance water. D) Insufficient filter time. Increase filter time to a mini- mum 4 hours per filter cycle.
-
Page 35: Frequently Asked Questions
Frequently asked questions Q: Why is my spa not heating? Check which mode you are in: standard, sleep or economy. See ‘Topside Control’ section on pages 14 – 18. Standard and Economy mode will allow temperature to drop 10 degrees. Sleep mode will allow temperature to drop 20 degrees. -
Page 36: Warranty
Divine Hot Tubs™ Deluxe also warrants their spa shell interior surface against blistering, cracking and delamination for five years from the original purchase date. - Page 37 This Limited Warranty is limited to the original owner, installed at the original site. Any requests for change of site location must first be approved in writing by Divine Hot Tubs™ Deluxe Series. This Limited Warranty is void if the spa has been altered, neglected, abused or misused or if any repairs have been made by an unauthorized agent.
- Page 38 NOTES...
- Page 39 NOTES...
- Page 40 Mon - Fri 8:00 am - 5:00 pm PST D E L U X E live better | feel better P.O. Box 2140 | Woodinville, WA 98072 | www.divinehottubsdeluxe.com © June, 2011 | Divine Hot Tubs™ Deluxe | spa manual, US/Canada, Divine Hot Tubs Deluxe 2-1-13...
Need help?
Do you have a question about the DL-1040 DLX and is the answer not in the manual?
Questions and answers