Fig 65: Gpfcu Parameters Pop-Up - rotork p3 Technical Manual

Identification
Tag name
Address
Type
Network
Current Status
The real time status of the actuator is listed in this pane on the screen.
Digital # 1 to # 8 : Digital input signal status, Active or Inactive.
Loopback
Relay Type
Alarm Status
Analogue Input 1 and 2
For the two analogue input channels a bar graph shows the current analogue input value
between 0 (closed) and 100% (open).
FCU Control web page Controls
Parameters - Available to all user levels
Fig 65: GPFCU Parameters pop-up
Pop-up screen shows the settings for all the parameters relating to the general purpose field
control unit. For users with Administrator level rights, the values can be edited.
Controls
Save Settings
Issue 06/15
: Identification tag given for this device.
: Network address.
: Shows the identified device type as GPFCU - GP.
: The network to which this device is connected (Pakscan 2 for 2-wire loop).
: Off or On.
: Fleeting or Maintained outputs from the relays.
: No Alarm or Alarm.
: Edited fields may be saved, accessible by Administrator level users only.
Publication PUB059-002-00
7. Internal Web pages
Close pop-up
87 of 136