Selecting Further Settings; System Lock 0 - Miele 09 507 300 Operating And Installation Instructions

Selecting further settings

Certain settings on the appliance can
only be selected in the settings mode.
The door alarm is automatically
disabled when the appliance is in
settings mode.

System lock 0

With the system lock you can secure
the appliance against:
– unwanted switching off,
– unwanted change of temperature,
– unwanted selection of DynaCool,
– unwanted switching on of the interior
lighting.
Switching the system lock on and off
^ Touch the settings sensor.
All selectable symbols will appear in
the display and the 0 symbol will flash.
^ Touch the OK sensor to confirm your
selection.
The last selected setting flashes in the
display and the 0 symbol lights up.
20
^ By touching the X or Y sensor, you
can now select whether the system
lock is switched on or off:
0: The system lock is switched off
1: The system lock is switched on
^ Touch the OK sensor to confirm your
selection.
The selected setting is adopted and the
0 symbol will flash.
^ Press the settings sensor to leave the
settings mode.
If no sensor is touched, the appliance
will automatically leave the settings
mode after approx. 1 minute.
If the system lock is activated, the 0
symbol will be illuminated in the
display.