Tinyloc R1 Plus Instruction Manual

Digital radio tracking receiver

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

INSTRUCTIONS MANUAL

1. INTRODUCTION

This manual provides instructions for the operation of your new TinyLoc R1 + digital receiver and an expla-

nation of the technique of radio-tracking.

The receiver is very simple to operate by using a menu to select different options in a similar way to a cell

phone.

Thanks to its small size, light weight and ergonomics, the search can be done even with only one hand

The receiver incorporates a small folding antenna on one side although, if necessary, it may be

connected to an outside antenna with more gain.

The receiver includes a light sensor to illuminate the screen when day light is insufficient.

It operates on normal batteries, so that if the batteries become flat while in the field it is not neces-

sary to recharge them for hours.

A frequency search consists of pressing a single button, making manual tuning unnecessary. This

innovation means that the signal sent by the transmitter is received at the ideal frequency.

It offers improved features, with less background noise, more sensitivity and better discrimination.

All this means there is a considerable increase in the operating range.

It covers a wide range of frequencies thus enabling it to work with a higher number of transmitters

and reducing the probability of one interfering with the other (3,790 channels).

It allows to save up to 100 transmitters

Each receiver includes:

A practical belt-mounted pouch

4 alcaline batteries

Table of Contents

Need help?

Do you have a question about the R1 Plus and is the answer not in the manual?

Questions and answers

Summary of Contents for Tinyloc R1 Plus

Page 1 INSTRUCTIONS MANUAL 1. INTRODUCTION This manual provides instructions for the operation of your new TinyLoc R1 + digital receiver and an expla- nation of the technique of radio-tracking. The receiver is very simple to operate by using a menu to select different options in a similar way to a cell phone.
Page 2 2. PARTS OF THE RECEIVER...
Page 3 3. SEARCH SCREEN ANT EXT 4. START For switching the receiver, press during 3 seconds the button “O ”/”O ” 4.1 STORE A TRAnSMITTER In THE RECEIVER MEMORY Press , you will find the option “Transmitters”, confirm it pressing , then confirm the op- tion “add”...
Page 4 5. SEARCH PATTERN Place the transmitter on the target to be followed and you will be ready to start radio-tracking searching. When the transmitter has been recorded in the receiver and calibrated, go to “search” screen. On the bot- tom of the screen will appear the name and frequency of the transmitter we are searching. Please ensure it is effectively the transmitter you want to track.
Page 5 5.1 RAdIO TRACKInG Radiotracking system allows the user to locate the target and to recover it even if the distance is upper few tens of kilometers. The transmitters can be placed in animals, people, objects to have control over its posi- tion.
Page 6 • Increase the gain as much as possible and scan with the receiver held flat and turning 360º to re- ceive the first signal pulses. • Start increasing the gain as much as possible and scan with the receiver held flat and turning 360º to receive the first signal pulses.
Page 7 This enables searching with greater precision. The TinyLoc R1 + receiver covers a larger range of frequencies to work with a greater number of transmit- ters (3,790) without so much probability of no interference between them. (432.0000 and 434.7900 MHz).
Page 8 245x66.5x40 mm Dimensions (antenna not extended) Hereby, Tinytronic S.L, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/CE. GENERAL CONDITIONS OF SALE AND WARRANTY See our Declaration of Conformity at: http://www.tinyloc.com/declarationofconformity...