Table of Contents
Advertisement
(2.1.16)
GLL – Geographic position – Latitude/longitude
$--GLL, llll.ll, a, yyyyy.yy, a, hhmmss.ss, A, a *hh<CR><LF>
(2.1.17)
HDT – Heading true
$--HDT, x.x, T*hh<CR><LF>
Heading, degrees true
(2.1.18)
LRI – Long-Range Interrogation
Longitude – E/W (south-west co-ordinate)
Latitude – N/S (south-west co-ordinate)
$--LRI,x,a,xxxxxxxxx,xxxxxxxxx,llll.ll,a,yyyyy.yy,a,llll.ll,a,yyyyy.yy,a*hh<CR><LF>
Control Flag
Sequence number, 0 to 9
(2.1.19)
LRF – Long Range Function
$--LRF,x,xxxxxxxxx,c--c,c--c,c--c*hh<CR><LF>
MMSI of requestor
Sequence number, 0 to 9
(2.1.20)
LR1 – Long-range Reply with destination for function request "A"
$--LR1,x,xxxxxxxxx,xxxxxxxxx,c--c,c--c,xxxxxxxxx*hh<CR><LF>
MMSI of responder
Sequence Number, 0 to 9
8-8
Status Mode indicator
UTC of position
Longitude, E/W
Latitude,N/S
MMSI of "destination"
MMSI of "requestor"
Function request, 1 to 26 characters
Name of requestor, 1 to 20 character string
Ship's name, 1 to 20 characters
MMSI of requestor (reply destination)
Longitude – E/W (north-east co-ordinate)
Latitude – N/S (north-east co-ordinate)
Function reply status
IMO Number, 9-digit number
Call Sign, 1 to 7 characters
- Quick Links:
- Configuration
- Own Ship's Detail Information
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the JHS-183 and is the answer not in the manual?
Questions and answers
How to change own ships MMSI NUMBER
My ASI JHS 183 it has been switch OFF and ON suddenly what can be the course?
The JRC JHS-183 could turn off and on suddenly due to a malfunction in the control unit, sensor issues, or power supply problems. If the internal GPS or external sensors (GPS, gyro, rate-of-turn indicator) are abnormal, the system may reset. Additionally, a faulty CDJ-2983 circuit board could cause the issue, and replacing it may resolve the problem. Running the self-diagnosis test can help identify the fault.
This answer is automatically generated
screen became blank
the display became blank
The provided context does not explicitly state why the display is blank on the JRC JHS-183. However, possible reasons could include power issues, faulty connections, or internal system errors such as CPU or memory failures. Checking the self-diagnosis results, ensuring proper power supply, and verifying cable connections may help identify the cause.
This answer is automatically generated
Здравствуйте на AIS JRC JHS-183 выходит ошибка Transponder restarted failure data
The error "Transponder restarted failure data" on the JRC JHS-183 AIS indicates that the AIS transponder has restarted due to continuous data corruption, continuous "Tx malfunction," or both occurring simultaneously. These issues trigger the system to automatically restart as a self-recovery action.
This answer is automatically generated