Replacement Of Bulbs - Hyundai Getz 2004 Owner's Manual

6- 32
DO-IT-YOURSELF MAINTENANCE
G290B01TB-GAT
Adjustment After Headlight As-
sembly Replacement
30mm (1.18 in.) Vertical line
Horizontal line W
15mm (0.59in.)
Cut-off line
L
H
If the vehicle has had front body repair
and the headlight assembly has been
replaced, the headlight aiming should
be checked using the aiming screen as
shown in the illustration. Turn on the
headlight switch. (Low Beam Position)
1. Adjust headlights so that main axis
of light is parallel to center line of the
body and is aligned with point "P"
shown in the illustration.
2. Dotted lines in the illustration show
the center of headlights.
SPECIFICATIONS:
"H"
Horizontal center line of headlights
from ground.
: 656 mm (26.8 in.)
"P"
"W"
Distance between each headlight
H
center.
: 1,100 mm (43.3 in.)
Ground
"L"
line
Distance between the headlights
and the wall that the lights are tested
G290B01L
against.
: 3,000 mm (118 in.).
G270A01TB-GAT

REPLACEMENT OF BULBS

Headlight Bulb
Before attempting to replace a head-
light bulb, be sure the switch is turned
to the "OFF" position.
The next paragraph shows how to
reach headlight bulbs so they may be
changed. Be sure to replace the
burned-out bulb with one of the same
number and wattage rating.
!
CAUTION:
Keep the lamps out of contact with
petroleum product, such as oil,
gasoline, etc.