Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vespermarine XB-8000
Summary of Contents for Vespermarine XB-8000
- Page 1 XB-8000 | XB-6000 INSTALL guIde...
-
Page 2: Optional Accessories
XB-8000 / XB-6000 AIS Transponder is a class B AIS Transponder with integrated NMeA 2000 and wiFi* connectivity. The XB provides information to improve your situational awareness and assist in avoiding collisions at sea. Because it consumes very low power it may be left turned on whenever your vessel is underway. -
Page 3: Status Led
coNNecTIoNS • LED Status • AIS/VHF antenna 185mm (7 1/4”) • USB • GPS antenna • NMEA 2000 • 10 pin power/data port Mount your XB at least 0.6m (2 feet) from any compass. Test your compass to verify that it operates properly when the XB is operating. STATuS Led coLor STATe... -
Page 4: Vhf Antenna
VhF ANTeNNA • A dedicated VHF antenna or Vesper Marine AIS/VHF Antenna Splitter is required. • Make sure your VHF antenna is an omni-directional antenna designed for the marine band (156-162MHz) and is well tuned at the AIS end of the band (VSWR 2:1 or less at 162MHz). - Page 5 power ANd dATA A 2m (6.5’) cable with attached 10 pin connector is supplied for connecting the XB to power, other devices over NMEA 0183 and an external silent mode switch. You may extend this cable as necessary. • Check you have the VHF antenna connected before connecting to power. • Fully engage the locking ring to ensure a watertight seal.
- Page 6 NETWORK POWER TERMINATING DROP CABLE RESISTOR Supported PGN’s Be sure to check out www.vespermarine.com/xb for an up-to-date list and description of PGN’s that are supported. pgNs received PGNs Sent (continued) 129040 AIS Class B Extended Position 127250 Vessel Heading 129794 AIS Class A Static Voyage...
-
Page 7: Client Mode
Wireless Access Point DAP - 1353 The XB-8000 can also join an existing network. It can do this in either DHCP mode (default) or you can set a static IP address using vmAIS (see configuration section). To prevent the address from automatically changing... - Page 8 • You can configure your XB using the WatchMate App* or the vmAIS PC software. These are available for download from www.vespermarine.com/xb • With vmAIS you can connect to the XB using either the USB virtual COM port or over WiFi* by entering the IP address (192.168.15.1 default).
- Page 9 (e.g. name, callsign, etc) is transmitted every 6 minutes. If the Status LED is not solid green yet, see the troubleshooting section for the probable cause. goT A queSTIoN? Visit www.vespermarine.com/xb for comprehensive answers to frequently asked questions, technical support, downloads, local dealer contacts and more…...
-
Page 10: Tech Specs
Tech SpecS Size 200mm wide x 130mm high x 60mm depth (7 7/8” x 5 1/8” x 2 3/8”) power supply 12-24 VDC 2A max, 3W nominal environmental Watertight (USCG CFR-46, IPx7) operating temperature -25°C to +55°C (-13°F to 131°F) Storage temperature -25°C to +80°C (-13°F to 176°F) 1 USB port (isolated), 1 NMEA input (isolated RS422), 1 NMEA output... -
Page 11: Status Led Troubleshooting
Your XB will continue to operate normally but receive performance will degrade. Built in integrity test error Solid/ Flashing An internal error has been detected. The XB may automatically recover, but if the error state persists contact our technical support network for assistance www.vespermarine.com/xb. -
Page 12: Intended Use
wArNINgS This AIS Transponder works in conjunction with other vessels and systems such as other AIS transponders and GPS devices. The accuracy of this device and the AIS system can be affected by many factors, including equipment failure or defects, environmental conditions and incorrect installation, handling or use. - Page 13 Pour satisfaire aux exigences d’exposition aux frequencies radio pour les appareils mobiles de transmission, une distance de 1 mètre ou plus doit être maintenue entre l’antenne de ce dispositif et les personnes pendant son fonctionnement. Pour assurer la sécurité, les opérations plus près de cette distance ne sont pas recommandées.
-
Page 14: Warranty
wArrANTy This transponder is warranted, when properly installed and used, to be free from defects in materials or workmanship for two years from the date the product was purchased by the first retail customer. This warranty applies to the original retail purchaser only and is not transferable. Within this period, Vesper Marine will, at its discretion, repair or replace any components which fail in normal use. - Page 15 NoTeS...
- Page 16 Phone +64 9 950 4848 | Email info@vespermarine.com Fax +64 9 950 4085 | Web www.vespermarine.com Follow us on Facebook | www.facebook.com/vespermarine Copyright © 2012, Vesper Marine Ltd. AIS WatchMate, WatchMate Vision and WatchMate Wheel are trademarks of Vesper Marine Ltd.
Need help?
Do you have a question about the XB-8000 and is the answer not in the manual?
Questions and answers