Siemens 7SG11 Manual page 169

Section 2: Settings
Relay Type
Substation
Notes on Tables
All settings found in the Argus 2 relay types are listed below. Within the list some settings (indicated
with greyed cells) are not always visible, for the following reasons:
• Depending on the version of the relay, a particular function and hence its related settings may not
be present, e.g. on a 2 phase-fault and SEF relay any settings related to earth-fault will not be present.
• Depending on the value of some settings, other settings will be hidden, e.g. if the main
characteristic is set to DTL, rather than an IDMT characteristic, the time multiplier setting will be
hidden and replaced by a time delay setting.
Some settings in the tables show text in square brackets, e.g. '[SEF/REF] Current Setting'. This
indicates different text that may be displayed, depending on the value of other settings, i.e. 'SEF
Current Setting' or 'REF Current Setting' dependent on the value of the 'Earth Fault Mode Select'
setting.
The second column in the tables ('Ref') provides a reference to the section in the Technical Reference
(publication P20007 issue 2004/02) that describes the setting.
The third column is left blank to allow users to complete the table with applied settings.
System Config. Menu
Setting name
Active Settings Group
Settings Group Edit/View
Copy Group
Power System Frequency
Set Pole B Type
Earth Fault Mode Select
Phase Rotation
P/F Rating (In)
E/F Rating (In)
[SEF/REF] Rating (In)
P/F CT Ratio
E/F CT Ratio
[SEF/REF] CT Ratio
VT Connection
VT Primary
VT Secondary
©2010 Siemens Protection Devices Limited
Ref Applied value
2.2.1
2.2.1
2.2.1
2.2.2 Hz
2.2.3
2.2.3
2.2.3
2.2.3 A
2.2.3 A
2.2.3 A
2.2.3
2.2.3
2.2.3
2.2.3
2.2.3
2.2.3
7SG11 Argus 2 Diagrams and Parameters
Serial Number
Feeder Identity
Setting name
Current Display
Export Power/Lag VAr Sign
Set Identifier
Set Alarm 1
Set Alarm 2
Set Alarm 3
Set Alarm 4
Set Alarm 5
FWD Name Tag
REV Name Tag
Calendar – Set Date
Clock - Set Time
Clock Sync. From Status
Default Screen Time
Change Password
Ref Applied value
2.2.3
2.2.3
2.2.4
2.2.5
2.2.5
2.2.5
2.2.5
2.2.5
2.2.6
2.2.6
2.2.7
2.2.7
2.2.7
2.2.8
2.2.9
P20009 Page 10 of 37