Table of Contents
Advertisement
11
DISASSEMBLY INSTRUCTIONS
Disassemble and repair the unit only after pulling out power plug from the outlet.
REAR PANEL
TOP PLATE ASSEMBLY
MAIN PCB
WARNING!
When you disassemble the Dryer, be sure to
disconnect the dryer from its electrical supply.
Protect your hands and arms from sharp edges
when working. To reduce the risk of personal
injury, adhere to all industry recommended
safety procedures including the use of long
sleeved gloves and safety glasses.
1.
Remove the 2 screws on the rear panel
2.
Lift and disassemble the rear panel from the
cover assembly, top.
1.
Pull plate assembly top backward from the panel
assembly front.
2.
Lift and disassemble the top plate from the cover
assembly top.
1.
Remove the 2 screws that hold the PCB
box in place.
2.
Slide the PCB box toward the rear of the
dryer and lift out.
3.
With a flat blade screwdriver, press the tabs
on the side of the PCB box and gently pry it
open.
4.
Disconnect the wiring from the PCB board
then remove the PCB board.
30
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DLE1501W and is the answer not in the manual?
Questions and answers
how do the white and black connectors on the PCB board disconnect fro the board
To disconnect the white and black connectors from the PCB board on the LG DLE1501W:
1. Remove the 2 screws holding the PCB box in place.
2. Slide the PCB box toward the rear of the dryer and lift it out.
3. Use a flat blade screwdriver to press the tabs on the side of the PCB box and gently pry it open.
4. Disconnect the wiring from the PCB board.
Ensure the dryer is disconnected from the electrical supply before performing these steps.
This answer is automatically generated