Setting The Size Conversion Factor - Kyocera TASKalfa 2551ci Service Manual

Item No.
U332

Setting the size conversion factor

Description
Sets the coefficient of nonstandard sizes in relation to the A4/Letter size. The coefficient set here
is used to convert the black ratio in relation to the A4/Letter size and to display the result in user
simulation.
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/Let-
ter size.
Method
1. Press the start key.
2. Select the item to set.
Rate
Mode
Level 1
Level 2
Setting: [Rate]
1. Change the setting using the +/-keys or numeric keys.
Display
Rate
2. Press the start key. The value is set.
Setting: [Mode]
1. Select the mode.
0
1
Initial setting: 0
2. Press the start key. The setting is set.
Setting: [Level 1/2]
1. Select the item.
2. Change the setting using the +/-keys or numeric keys.
Display
Level 1
Level 2
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Size coefficient
Toggling full-color count and color coverage count display
Low coverage threshold value
Middle coverage threshold value
Size coefficient
Display
Full-color count display
Color coverage count display
Low coverage threshold value
Middle coverage threshold value
Description
Description
Description
Description
Description
1-3-124
Setting Initial
range setting
0.1 to 3.0 1.0
Setting Initial
range setting
0.1 to 99.8 1.0
0.1 to 99.9 2.5
2NP