Section 5: Maintenance Options And Smdr; Backing Up Site Data; Pc Card Data Base Compatibility; Backing Up Site Data With A Pc Card - NEC DS2000 Hardware Manual

Backing Up Site Data

Backing Up Site Data

PC Card Data Base Compatibility

Software version 03.**.** databases are not compatible with any prior 02.**.** versions.

Backing Up Site Data with a PC Card

You can use PC Card P/N 85880 to back up and restore your site data. You cannot store data bases on PC
Card with Software P/N 80051-V03.**.**.
To use the PC Card to back up site data (Figure 5-1):
1. Insert the PC Card into the CPU.
2. Be sure the CPU mode switch is set to
3. Enter the programming mode.
4. Dial
5. Dial Y
6. Enter a name for the database you want to save (up to 10 characters long).
7. When you are done entering the name, press
8. The system assigns the name you entered in step 7 to the data base address you select below:
- Press
- Skip this step to select the currently displayed data base.
DS2000 Hardware Manual
Section 5: Maintenance
Options and SMDR
ICM + #*#* + 372000 + HOLD
9906 + HOLD .
You see: START?
To quit program 9906 instead, dial
+ HOLD .
You see: 9906: DATABASE NAME
Refer to Figure 5-2 Entering Names on page 5-3 if you need help when entering names.
Skip this step if you want to save data in an address that already has a name assigned.
You see the name and date of the first database stored. If no data bases are stored, you see:
9906: DB00
(empty)
L M
VOL or VOL to scroll through the addresses.
There are 16 data base addresses (DB 00 to DB 15).
OR
Backing Up Site Data
RUN .
N + HOLD .
HOLD .
Section 5: Maintenance Options and SMDR N 5-1
5