Page 1
SPT-1000 User Manual Be sure to read the manual before using the product in order to use safely and correctly. Please keep user manual at a right place to be available.
1. Before you start The following safety signs are affixed to the SPT-1000(C). CAUTION Please make sure to read the following precautions, precautions and information before operating the treadmill. Failure to adhere to the following will void warranty Safety Instructions •...
Page 4
• Do not wet the surface of the SPT-1000(C) with any liquids. Cleaning involves only the use of a fine mist sprayer or a damp cloth. • Any liquid container in proximity to the SPT-1000(C) must have a tight fitting cap or lid. Do not use the SPT-1000(C) if a liquid has been spilt on any surface.
2. Installation and assembly Technical Specifications The SPT-1000(C) does not require any electrical wall outlet. The SPT-1000(C) is a self-paced treadmill. The running belt surface of this product is very different to the general surface of a conventional treadmill and provides significant traction and an experience never seen in a typical treadmill Belt Specification •...
Page 6
Parts name Parts Q’ty Left handle assembly 1 set Right handle assembly 1 set Main body assembly 1 set Mounting bolts & washer of left handle assembly 1 set Mounting bolts & washer of right handle assembly 1 set...
3. Maintenance Regular maintenance Periodic cleaning and inspection of the condition of the lubrication will keep the SPT-1000(C) in optimal condition. The following is the recommended maintenance schedule. In environments with severe pollution, the frequency of inspections and maintenance should be increased.
It is designed to be driven in one direction only for the user safety. The one-way drive system provides stability to the user and to enter and leave safely from the rear of the SPT-1000(C). WARNING Boarding or getting off is only to be done from the rear of the SPT-1000(C).
5. Quality Assurance 1. The warranty period for this product is two years after purchase. However, failure that occurred within the warranty period by natural disaster or customer's fault will be processed at a cost. 2. The failure within warranty period will be repaired free of charge or be compensated in accordance with the consumer compensation regulations.
Need help?
Do you have a question about the SPT-1000 and is the answer not in the manual?
Questions and answers