Table of Contents
Advertisement
Powerbase Xtreme
1500W 210mm Compound Mitre Saw
Assembly Manual-Original Instructions
Important
- Please read these instructions fully before starting assembly
These instructions contain important information that will help you get the best
from your compound mitre saw, ensuring it is assembled correctly and safely.
If you need help or have damaged or missing parts, call the Customer Helpline
on 03448012949.
After Sales Support
UK/Ireland
Web
LX400
BMS210K.1
03448012949
WWW.HOMEBASE.CO.UK
Advertisement
Table of Contents
Summary of Contents for Homebase Powerbase Xtreme
- Page 1 Powerbase Xtreme 1500W 210mm Compound Mitre Saw BMS210K.1 Assembly Manual-Original Instructions After Sales Support UK/Ireland 03448012949 WWW.HOMEBASE.CO.UK Important - Please read these instructions fully before starting assembly These instructions contain important information that will help you get the best from your compound mitre saw, ensuring it is assembled correctly and safely.
-
Page 2: Table Of Contents
Contents Safety Information.......................3 Warnings Symbols....................3 General Power Tool Safety Warnings..............4 General Safety Warnings..................6 Mitre saw safety instruction.................6 General Safety Warnings For Laser..............7 In the Box........................9 Parts........................9 Operation Instructions....................10 Assembly......................10 Operation......................13 Maintenance......................15 Technical Data......................18 Noise Information......................18 Vibration Information....................18 Accessories....................... -
Page 3: Safety Information
Safety Information Important - Please read these instructions fully before starting assembly Warnings Symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembly and operating the compound mitre saw. To reduce the risk of injury, user must read instruction manual Warning Wear ear protection... -
Page 4: General Power Tool Safety Warnings
Safety Information Important - Please read these instructions fully before starting assembly Warnings Symbols (continued) Important! When using equipment, the following safety precautions must be followed to avoid injuries and damage. • Read all operating instructions carefully and comply with them. It is important to understand these instructions and to acquaint yourself with the machine, its correct usage and all safety requirements. - Page 5 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings (continued) Wear protective hair covering to contain long hair. 9. Use protective equipment Use safety glasses. Use face or dust mask if working operations create dust. 10.
-
Page 6: General Safety Warnings
Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings (continued) manual may present a risk of personal injury. 22. Have your tool repaired by a qualified person This electric tool complies with the relevant safety rules. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user. -
Page 7: General Safety Warnings For Laser
Safety Information Important - Please read these instructions fully before starting assembly Mitre Saw Safety Instruction (continued) 12. Keep the floor area around the machine level, well maintained and free of loose materials e.g. chips and cut-offs; 13. Provide adequate general or localised lighting; 14. - Page 8 Safety Information Important - Please read these instructions fully before starting assembly General Safety Warnings For Laser (continued) Additional safety warning for class 2 laser The laser device fitted to this tool is CLASS 2 with a maximum radiation of 1mW and 650nm wavelength.
-
Page 9: In The Box
In the Box Parts Handle Upper blade guard Rotary table handle Lock pin (See Fig. E) Dust bag Base plate Locking screws for straight guide (See Fig. K) Safety guard mounting plate Rotary table Bevel lock knob (See Fig. F2) Saw blade Rotary table locking knob Dust extraction port (See Fig. -
Page 10: Operation Instructions
Operation Instructions Assembly NOTE: Before using the tool, read the instruction book carefully. Intended Use The power tool is intended as a stationary machine for making straight lengthways and crossways cuts in wood. Horizontal mitre angles of -45° to +45° as well as vertical bevel angles of 0°... - Page 11 Operation Instructions Assembly (continued) 4. Mounting holes (See Fig. C) Before use, the saw can be fixed to a firm, level surface with the 4 mounting bolts (not supplied). Four holes are provided in the base of the saw to enable it to be fixed to a bench, or other supporting surface.
- Page 12 Operation Instructions Assembly (continued) the workpiece. (Locate the clamp vice at right side when you make bevel cutting.) Do not operate the saw without clamping the workpiece. Make sure that the work clamp securing screws are tightened. Operation 1. To make a cut 1.
-
Page 13: Operation
Operating Instructions Operation (continued) 3. Bevel cuts (See Fig. F1, F2) A bevel cut is made at 0° mitre and any bevel angle in the range from 0° to 45° left. The saw can be moved from the normal 0° perpendicular position to an angled position down to 45° from the horizontal, on the left only. -
Page 14: Operating Instructions
Operating Instructions Operation (continued) sure the batteries are fitted in the laser guide before carrying out precision cutting. To fit the batteries, remove the battery storage cover(c), insert 2 x 1.5v AAA batteries, then replace cover. NOTE: Ensure correct battery polarity. To use the laser guide, simply slide the laser on/off switch(b) at the “I”... -
Page 15: Maintenance
Maintenance WARNING! Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. When all the adjustments, settings or maintenance have been done, make sure that all keys and wrenches have been removed and that all screws, bolts and other fittings are securely tightened. - Page 16 Maintenance 2. Changing the saw blade (See Fig. M, N) Disconnect the saw from the power supply. Lower the saw head until the blade securing bolt can be seen. Press blade spindle lock (f ) and rotate the blade until it is locked, then loosen and remove the blade securing bolt, and outer flange with the hex key in clockwise direction.
- Page 17 Maintenance replace them with the new set (not supplied). It must be replaced in pairs. - With a suitable slotted screwdriver turn the cap anti-clockwise until the carbon brush is released, replace the brush and make sure that they locate well and are secured within the brush retainer.
-
Page 18: Technical Data
Technical Data Rated voltage 230-240V~50Hz Rated power S1 1200W / S6 25% 1500W No load speed 5000/min Bevel capacity 0 - 45º Mitre capacity 0-45 º left and right Blade size 210mm Protection class Machine weight 6.3kg Cutting capacity Mitre/Bevel: 0 120 x 60mm Mitre/Bevel: 0 120 x 35mm... -
Page 19: Accessories
Vibration Information Vibration Information(continued) The use the correct accessory for the tool and ensuring it is sharp and in good condition. The tightness of the grip on the handles and if any anti vibration accessories are used. And the tool is being used as intended by its design and these instructions. This tool may cause hand-arm vibration syndrome if its use is not adequately managed. -
Page 20: Plug Replacement(Uk & Ireland Only)
Plug Replacement(Uk & Ireland Only) 13 Amp fuse approved to BS1362 Connect Blue to N Brown L (live) (neutral) Outer sleeve Cable grip firmly clamped If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: BLUE =NEUTRAL BROWN = LIVE As the colors of the wires in the mains lead of this appliance may not correspond with the... -
Page 21: Guarantee
In the event of a problem with the product within the guarantee period please return it to your nearest Homebase store. If the item is shown to have an inherent defect present at the time of sale, the store will provide you with a replacement Your statutory rights remain unaffected.
Need help?
Do you have a question about the Powerbase Xtreme and is the answer not in the manual?
Questions and answers
unsure of what these things are for (see photo)
The Homebase Powerbase Xtreme includes components for assembly, operation, and maintenance. These components help ensure proper setup and safe use. The assembly manual provides instructions on fitting parts correctly. Safety warnings guide users on handling precautions. The included plug and fuse ensure electrical compatibility. Accessories and maintenance instructions help with long-term operation. If parts are damaged or missing, customer support is available for assistance.
This answer is automatically generated