Performing The Initial Setup; Initial Setup; If You Want To Reset This Feature - Samsung 5 SERIES User Manual

05 Performing the initial setup

- The initial setup differs from model to model.
- Turn on the TV using the P button on the remote control or TV controller.

Initial setup

The initial setup dialogue box appears when the TV is first activated. Follow the on-screen
instructions to finish the initial setup process such as selecting the menu language, scanning
channels, connecting to the network, and more. During each step, either make a choice or skip the
step. You can manually perform this process at a later time in the MENU m → System → Setup →
ENTER E menu.
- If you connect any external device to HDMI IN (STB) before starting initial setup, the source of
your live TV signal is set to STB. After finishing with this process, you will not be able to scan all
channels and stores them in the TV's memory.
- If you want to connect aerial cable to your TV, select Aerial. In this case, you will be able to scan
all channels and stores them in the TV's memory.

If You Want to Reset This Feature...

Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-
0-0".
If you want to change the PIN number, use the Change PIN function.
You should do Setup (MENU → System) again at home even though you did in shop already.
If you forget the PIN code, press the remote control buttons in the following sequence in Standby
mode, which resets the PIN to "0-0-0-0": MUTE → 8 → 2 → 4 → POWER (on)
UK5100B_XU_BN68-07408A-02_ENG.indb 17
English - 17
2016-07-11 오전 11:43:49