Adjusting The Bobbin Winder Switch - Janome DC5100 Service Manual

SEWING MACHINE

ADJUSTING THE BOBBIN WINDER SWITCH

ADJUST THE BOBBIN WINDING SWITCH
1. REMOVE THE FRONT COVER.
2. SET THE BOBBIN WINDER ARM IN THE SEWING POSITION AND LOOSEN THE SETSCREW.
ADJUST THE CLEARANCE BETWEEN THE BOBBIN WINDER ARM AND THE SWITCH FIXING
PLATE TO 0.7 TO 1.3 MM.
3. TIGHTEN THE SETSCREW.
4. INSTALL THE FRONT COVER.
TO CONFIRM:
TURN THE POWER SWITCH ON.
THE LED DISPLAYS
WINDING POSITION, AND DISPLAYS SEWING STITCH PATTERN SELECTION WHEN THE BOBBIN
WINDER IS RETURNED TO THE SEWING POSITION.
SETSCREW
APPROX.
0.7 TO 1.3mm
SWITCH FIXING
PLATE
BOBBIN
WHEN THE BOBBIN WINDER SPINDLE IS SET THE BOBBIN
WINDING
BOBBIN WINDER ARM
BOBBIN
WINDING
BOBBIN WINDING
41
MODEL DC5100