Table of Contents
Advertisement
2.COPY FUNCTIONS
Enlarging or reducing the copy size
You can enlarge or reduce the size of copies in the following three ways.
Specify the ratio manually ( P.49)
Select a fixed zoom ratio ( P.50)
Automatic Magnification Selection (AMS) ( P.52)
Specifying the ratio manually
Menu
Functions
ZOOM
1
Press [COPY].
2
Press
or
3
Press
or
When manual zoom is already selected, this step is not necessary.
READY
100%
1
A4
100%
Settings
Manual zoom (25 - 100 - 400%)
FIXED ZOOM A/B format:
50% (A3 -> A5), 71% (A3 -> A4),
71% (A4 -> A5), 141% (A4 -> A3),
141% (A5 -> A4), 200% (A5 -> A3),
300%, 400%
LT format:
50% (A3 -> A5), 60% (LG -> ST),
65% (LD -> LT), 65% (LT -> ST),
78% (LD -> LG), 78% (LG -> LT),
100% (LT -> LG), 121% (LG -> LD),
129% (LT -> LD), 129% (ST-> LT),
154% (ST -> LG), 200% (ST -> LD),
300%, 400%
K format:
50% (A3 -> A5), 54% (8K -> A5),
64% (A3 -> 16K), 69% (8K -> 16K),
71% (A3 -> A4), 71% (A4 -> A5),
76% (16K -> A5), 76% (8K -> A4),
91% (A3 -> 8K), 91% (A4 -> 16K),
108% (16K -> A4), 108% (8K -> A3),
129% (A4 -> 8K), 129% (A5 -> 16K),
138% (16K -> 8K), 141% (A4 -> A3),
141% (A5 -> A4), 152% (16K -> A3),
182% (A5 -> 8K), 200% (A5 -> A3),
300%, 400%
AMS
to select the item displayed on the LCD screen, and then press .
to select the setting item for manual zoom.
1
A4
2 COPY FUNCTIONS
Description
Adjusts the ratio manually.
P.50 "Selecting a fixed
zoom ratio"
P.52 "Automatic
magnification selection (AMS)"
Copy Settings
49
Advertisement
Table of Contents
Need help?
Do you have a question about the e-studio2309a and is the answer not in the manual?
Questions and answers
2-1 photoocopy does not work
The Toshiba e-STUDIO2309A photocopy function may not work due to several possible reasons:
1. Toner Depletion – If the toner has run out, replace the toner cartridge when the "TONER EMPTY" message appears on the LCD screen.
2. Copy Density Settings – If the copy image is too light or too dark, adjust the manual copy density mode accordingly.
3. Platen Cover or ADF Not Fully Lowered – Ensure the Platen Cover or Reversing Automatic Document Feeder is fully lowered to block outside light.
4. Dirty Original Glass or Platen Sheet – Clean the original glass or platen sheet to prevent stains on the copied image.
5. Use of Highly Transparent Originals – If copying overhead transparencies or tracing paper, place a blank plain sheet of the same size or larger over the original.
If the issue persists, further troubleshooting may be needed.
This answer is automatically generated