Detailed Operation; Guide - CYBEX 525AT Owner's Manual

Detailed Operation Guide
Maximum user weight is 400 lbs. (181 kg).
1. Plug the power cord into a power outlet from a grounded circuit.
Coil up the remainder of the power cord and place it out of the way.
2. Toggle the on/off (I/O) power switch under the front end of the unit to the on position (I).
The control panel will light up and be in the Dormant Mode.
3. Verify foot plates are completely stopped.
4. Grasp handrail and step carefully onto foot plates.
Begin striding.
5. Select Quick Start or WORKOUTS.
If Quick Start is selected, The console will beep for one second to signal start of workout and enter
Active Mode.
If WORKOUTS is selected, Select a workout and setup options.
a)
Select workouts 1 through 8 with the UP
b)
Press the ENTER
Time
Level
Weight
c)
Use the UP
Press the ENTER
For the most accurate resistance and calorie count, you must set your correct weight before
beginning your workout (including clothing).
When selecting a workout you must press the ENTER
Level, or Weight. E3 View Monitor models include age selection.
After final selection has been made the console will beep for one second to signal start of workout,
and enter Active Mode.
Cybex 525AT Arc Trainer Part Number 5525-4 F
key to advance to setup options.
and DOWN keys to increase or decrease each of the setup options.
key to advance to the next option.
Page 51 of 82
and DOWN
Enter workout time.
Enter workout level.
Enter user weight.
key after each adjustment of Time,
keys.