Speed Dialing; Repertory Keys - Siemens euroset 805 S Operating Instructions Manual

Speed dialing

You can store up to 10 frequently required numbers as
speed dialing destinations (max. 16 digits each) can be
stored on digit keys.
Storing numbers
Lift the handset and press the SET key
and press the SET key
aling number (between 0 and 9). Replace the handset.
If you are in the middle of a call, you can store the number
just dialed by pressing the SET key
the speed dialing number on which the number is to be
stored.
Dialing speed dialing numbers
Lift the handset and press the speed dialing key/MEM
Enter the speed dialing destination between 0 and 9.
Note:
• A dialed number is not stored if it contains more than 15
digits.
• You can delete the number assigned to a specific key by
overwriting it.
• Dial pauses (approx. 3.6 seconds – not in first position) can
be inserted by pressing the

cluded in the speed dialing/name keys and redial memory

and are required in the case of certain PABXs
(e.g. 0
• The keys
type, but can only be selected in the case of DTMP signal-
ing.

Repertory keys

Three repertory keys
Storing

Lift the handset and press the SET key
and press the SET key
keys . The number is now stored on this repertory key.
Replace the handset.

Storing during a call
Press the SET key
on which the number is to be stored.
Repertory dialing
Lift the handset and press the repertory key
stored on this key is immediately dialed.
Please see note under "Speed dialing".


2368).
and are stored regardless of the dial

are available for up to 32 digits each.

again. Press one of the 3 repertory

twice followed by the repertory key

again. Enter the required speed di-


key. These pauses are in-
6
. Enter the number
twice and entering

. Dial the number

. The number

.