Attach The Front Panel; Install Remote Control Battery - Philips CED780/12 User Manual

•
Since the unit cannot be used if the slant angle of
dashboard opening is above 20 degrees, ensure
that the horizontal slant of the dashboard opening
is between 0 and 20 degrees.
3
When installing in a shallow space, change the position
of slide brackets.
4
Place the supplied rubber cushion over the end of the
mounting bolt.
5 Install the sleeve into the dashboard and bend the
tabs outwards to fix the sleeve. Slide the unit into the
dashboard until you hear a click.
Note
•
If the unit is fixed by the supplied screws instead of the
sleeve, skip this step.

Attach the front panel

1
Attach the trim plate.
2
Insert the left side of the panel in the chassis until it is
correctly engaged.
3 Press the right side of the panel until the mechanism
locks it into place.

Install remote control battery

Caution
•
Risk of explosion! Keep battery away from heat,
sunshine or fire. Never discard battery in fire.
Note
•
Remove battery if it is flat or if the remote control will
not to be used for a long time.
•
Battery contain chemical substances. It should be
disposed of properly.
1 Open the battery compartment.
EN
11