Philips FC8149 User Manual
Hide thumbs
Also See for FC8149:
- User manual (150 pages) ,
- Instructions manual (116 pages) ,
- Manual (85 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Philips FC8149
Summary of Contents for Philips FC8149
- Page 1 FC8149-FC8140...
- Page 3 English introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. general description (Fig. 1) 1 Cover 2 On/off button 3 Dust container full indicator 4 Electronic suction power control...
-
Page 4: Telescopic Tube
English If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. This appliance is not intended for use by persons (including children) with reduced physical,... - Page 5 English accessory clip You can store two accessories in the accessory clip at the same time. Store accessories in the accessory clip by pushing them into the clip while turning a little (Fig. 9). Crevice nozzle, small nozzle and brush nozzle Connect the crevice nozzle, small nozzle or small brush to the handgrip of the hose or to the tube.
-
Page 6: Hepa Exhaust Filter
English Put the filter cone back into the dust container and turn it clockwise in the direction marked by the arrow to lock it in place (‘click’) (Fig. 22). Close the bottom cover of the dust container and lock it by pushing it home behind the cover latch (‘click’) (Fig. -
Page 7: Troubleshooting
(Fig. 35). guarantee and service If you need service or information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country, go to your local Philips dealer. - Page 8 English Perhaps the electronic suction power control is set to a low setting. Set the control to a higher setting. Perhaps the nozzle, tube or hose is blocked up. (Fig. 36) To remove the obstruction, disconnect the blocked-up item and connect it (as far as possible) the other way round.