Operation Using Easyserve; Program Easyserve Vpc 20150; Minimum System Requirements; Installation - Stock DISOCONT Tersus DT-9 Configuration And Operation Manual

7 Operation Using EasyServe

This chapter describes control of the DT-9 using EasyServe.

7.1 Program EasyServe VPC 20150

Designed as PC program for DISOCONT commissioning and servicing, EasyServe lets you perform
any operating and calibrating operation. The program is operable under Microsoft 2000/XP/Vista
operating systems. The control unit lets you perform all controlling and calibrating operations without
restrictions. The menu control permits flexible and easy adjustment, lets you access service data,
operate the scale for servicing, and customize the menu texts on PC screen and all operator units.

7.2 Minimum System Requirements

Pentium or CPU-compatible
•
900MB free hard disk space
•
VGA display, 32768 color monitor recommended
•
Operating systems Microsoft Windows® 2000/XP/Vista with latest service packs
•
Mouse or other type of pointer
•
CD-ROM drive.
•

7.3 Installation

EasyServe
Insert CD VPC20150 into CD-ROM drive. Normally, installation starts automatically. If not, open
Windows explorer select your CD-ROM drive. To open, double click on file. The automatic installation
program prompts you through a number of dialogs, for you to confirm.
Upgrade
If an old EasyServe version is available on your PC it must be removed (using Control Panel | Add or
Remove Programs) before the installation can be performed.
Attention
To be able to install the EasyServe program, your name must be registered as user in the group of
administrators under Windows® 2000/XP/Vista. Top execute program, main user rights are required.
DISOCONT® Tersus (DT-9) Configuration and Operations Manual
©Schenck Process Group
39