Samsung GALAXY S6 User Manual page 196

Bluetooth Settings Operations
●
Enable Bluetooth: From Bluetooth settings, tap On/Off.

When enabled, confirmation appears for your phone to be discoverable by other devices.
Follow the prompts.
●
Change Your Phone Name: From Bluetooth settings, tap More > Rename device, enter a new
name, and tap Done.

This changes the name of your phone as seen by other devices.
●
Pairing Bluetooth Devices: Make sure the other devices are set to be discovered. From
Bluetooth settings, tap the device name in "Available devices" and follow the prompts.

Depending on the device, you may be required to enter or accept a passkey.

If the target device does not appear, tap Scan to search again.

This setting is available when Bluetooth is enabled.
●
Change the Name of a Paired Device: From Bluetooth settings, tap Settings
paired device name, tap Rename, enter a new name, and tap Rename.

Emoji cannot be used in a device name.

This setting is available when Bluetooth is enabled.
●
Canceling Pairing: From Bluetooth settings, tap Settings
then tap Unpair.

This setting is available when Bluetooth is enabled.
●
Enable Service from Paired Device: From Bluetooth settings, tap Settings
device name, and then tap a listing.

If a confirmation prompt appears, follow the prompts.

This setting is available when Bluetooth is enabled.

This setting is available when the paired device is providing a service.

Tap the setting to toggle On/Off.
●
Search for Other Devices: From Bluetooth settings, tap Scan.

This setting is available when Bluetooth is enabled.
●
Check Files Received Using Bluetooth Transfer: From Bluetooth settings, tap More >
Received files, and then follow the prompts.
Settings
next to a
next to a paired device name, and
next to a paired
185