Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2014 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15a
Advertisement
Table of Contents
Related Manuals for Central Machinery 62501
Summary of Contents for Central Machinery 62501
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
4. DON’T USE IN DANGEROUS ENVIRONMENT. to do a job for which it was not designed. Don’t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted. Page 2 For technical questions, please call 1-888-866-5797. Item 62501... - Page 3 It’s safer than using your hand and it frees both hands to operate tool. 21. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Item 62501 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 5. Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool’s plug. Page 4 For technical questions, please call 1-888-866-5797. Item 62501...
-
Page 5: Grinder Safety Warnings
Do not use a power tool while you are tired or but must be supplied by the operator. under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Item 62501 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Vibration Safety
If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUcTIONS. Page 6 For technical questions, please call 1-888-866-5797. Item 62501... -
Page 7: Specifications
Motor No Load Speed 3560 RPM Max. Accessory Diameter 8" OD x 3/4″ x 5/8″ Arbor Arbor Size 5/8″ Mounting Holes (2) 7/16" Work Light Bulb 120V/60W (Sold separately) E237800 Item 62501 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Setup
Washer (64) as shown in Figure B. 5. Adjust each Spark Guard (62, 63) to within 1/16" (0.0625") of the Grinding Wheel Figure c: Right Eye Shield Installation and tighten each Bolt (66). Page 8 For technical questions, please call 1-888-866-5797. Item 62501... - Page 9 Functions Lamp Eye Shields Wheel Guards Spark Guards Grinding Wheels Work Rests On/Off Switch Item 62501 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Operation
Wrench tighten only enough so that the wheel is securely held on the spindle. WARNING: To prevent serious injury, do not overtighten flange. Overtightening can Wheel damage the wheel, causing wheel failure. Here 45° 45° Page 10 For technical questions, please call 1-888-866-5797. Item 62501... -
Page 11: General Operating Instructions
4. Apply the workpiece to the wheel, allowing the tool to operate at full speed. If the tool bogs down, use lighter pressure. Item 62501 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Maintenance
Do not use wheels drawers. Keep storage area dry and above that have been dropped or bumped. freezing. Any grinding or cut-off wheels exposed to humidity or freezing temperatures must not be used. Page 12 For technical questions, please call 1-888-866-5797. Item 62501... -
Page 13: Troubleshooting
If an extension cord is needed, use one with the proper diameter for its length and load. See Table A on page 3. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 62501 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 62501... -
Page 15: Assembly Diagram
Assembly Diagram Item 62501 For technical questions, please call 1-888-866-5797. Page 15... -
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 62501 and is the answer not in the manual?
Questions and answers