Performing A Factory Reset Of Your Smart Body Analyzer - Withings WS-50 Installation And Operating Instructions Manual

Performing a Factory Reset of Your
Smart Body Analyzer
All data that wasn't synced before factory resetting your Smart Body Analyzer
will be lost permanently.
Factory resetting your Smart Body Analyzer allows you to delete the data stored on it.
Factory resetting completes the dissociation process.
Factory resetting your Smart Body Analyzer will not remove any of the data
from the Withings Health Mate® app.
1. Go to the Bluetooth settings of your device and "forget" your Smart Body Analyzer.
from the list of Bluetooth devices.
2. Remove one of the batteries for ten seconds.
3. Put the battery back.
4. When "Hello" appears on the display of your scale, press and hold the two buttons
at the back of the scale for 20 seconds until "Factory" appears.
At this time, you can start the installation process for the Smart Body Analyzer.
Refer to "Setting Up the Smart Body Analyzer" on page 9
Smart Body Analyzer
v1.0 | April, 2016
for more information.
EN - 55