See Figure - ParaBody Leg Press 100 Assembly Instructions Manual

For assembly to the the 220 and 880 Gym Systems .
5
14
17
13
FIGURE 1
STEP 1:
• NOTE: Follow STEP 1 for the assembly of the LEG PRESS to the 220 and 880 Gym Systems. If you have the 777 Gym
System proceed to STEP 2.
• SECURELY assemble the SECOND ARM (5) to the FRAME (1) using one 1/2 X 5" BOLT (12), two 3/4" FLANGE BEARINGS
(14), one 3/4 X 4" SHAFT (17) and one 1/2" LOCK NUT (13). See FIGURE 1.
• SECURELY assemble the MAIN ARM (4) to the FRAME (1) using one 1/2 X 5" BOLT (12), two 3/4" FLANGE BEARINGS (14),
one 3/4 X 4" SHAFT (17) and one 1/2" LOCK NUT (13). See FIGURE 1. (NOTE: Make sure MAIN ARM is orientated cor-
rectly, top hole should be 9-1/2" from the top of arm as shown in FIGURE 1.)
• SECURELY assemble two 1" SQ. GLIDES (18) to each side of the MAIN ARM (4) where the MAIN ARM (4) contacts the FRAME

(1) See FIGURE 1.

• Proceed to to STEP 3.
1/2
0
4
18
1/2
1 2
9-1/2" Make sure MAIN ARM
is orientated correctly
1/2 1/2
3
4
1
12 1/2 X 5"
1/2
4 5
1/2
6