Optional Battery Plate; Troubleshooting - SWIT S-4915T/R User Manual

7. Optional Battery Plate

7.1 S-4915T And S-4915R Battery plate choice
S-4915T is equipped with DV battery plate to be powered by standard DV batteries. There're following
different types of DV batteries for choice:
Plate type
F
U
D
B
J
V
I
C
E
Note: The battery plates are fixed on S-4915T and S-4915R at factory, please specify the suitable plate type
before purchase.
8. Trouble-Shooting
If the receiver failed to output video correctly, the possible causes are as below; please find the solution from
following chart:
The receiving video
No display
Video quality is poor
Compatible battery
SONY L series NP-F770/970
SONY BP-U60/30
Panasonic CGA-D54S/D28S
Panasonic VW-VBD58
Panasonic VW-VBG6
JVC BN-V428
JVC BN-VF823
JVC SSL-JVC50
Canon BP-930/945/970G
Canon DSLR battery LP-E6
Possible Causes
No power
The antennas are not installed
properly and screwed tightly
Bad connection of video cable
Video format is not supported
Bad connection of video cable
The wireless transmission is
disturbed by environment, such as
other electronic devices in the
same location.
The transmission distance is out of
effective range or being interfered
by obstacles.
Recommended SWIT battery
S-8972, S-8970, S-8770
S-8U93, S-8U63
S-8D62, S-8D58
S-8BG6
S-8428
S-8823
S-8I50
S-8945, S-8845
S-8PE6
Solution
Check power connection and switch on
the transmitter and receiver
Install the antennas properly and screw
tightly of both transmitter and receiver
Check video cable connection of both
transmitter and receiver
Check the format of video source.
(See the supported video formats at
9. Specifications.)
Check video cable connection and if
possible, change to better quality cables.
Wait for one minute or reboot both the
transmitter and receiver
Try the wireless transmission at a closer
distance or clean out the obstacles