Table of Contents
Advertisement
RECORDING
COMPACT
DISCS
EDIT RECORDING
NOTES:
The following edit recording
operations
can be performed.
-
Selections
from multiple discs can be programmed
and
recorded automatically.
a) Normal edit recording
b) Program edit recording
c) Fade-out edit recording
d) Backward skip edit recording
CD play starts automatically
after 8 seconds,
so the
recording
will not be interrupted
by the leader tape at
the beginning
of sides A and B.
A short blank space is automatically
recorded
at the
end of each track.
The highest track number which can be edited is 32.
a) Normal edit recording
Since
track 3 will not fii on this side, side B
is used instead and an
unrecorded blank is created here.
SIDEA 25 min.
..........................................
:.:.:.:.:.:.+.:.:.:.:.:.:.:.~.:.:.:
>
Manual reverse
I
SIDE B 25
min.
.-
1
Unrecordedblank
To record a CD with no change
in the track sequence,
4.
follow the example below.
To record all tracks on a 5-track disc (total play time of 47
min 20 see) on DISC 2, onto a 50-minute tape:
1. Press the DISC SKIP button to select the DISC 2.
OISC SKIP
~
5.
2. Press the EDIT button to select the recording
tape
length.
EDIT
D
The display indicates:
6.
DISC
2 C-46
EDIT SIDE A
123...
7.
Each time the EDIT button is pressed,
the tape length
display changes
in the following
sequence:
8.
~6+C-54+C-60<-74
+C-90+C-
+(Cleared)
9.
To set the desired
tape length up to C-99, use the
" l@I/CU
" or "
~/DDI
" button. To set "C-50",
press the EDIT button to select "C-46"
and press the
"
DU/w
" button 4 times. "C-50"
appears
on the
display.
Press the REC button to set the record pause mode for
side A.
REC
PLAY
Press the
D/011 button to start playback with track 1
on disc 2. The deck starts recording
at the same time.
L!-1
DISC 2
TRACK 1
0.01
EDIT b
SIDE A
123...
When all of the tracks
for side A have finished playing,
the player will go to pause mode at the beginning
of
the track to be recorded
onto side B.
After the tape deck stops automatically,
turn over the
cassette and reinsert it.
Press the REC button to start recording
of side B,
The player will start playback with track 3 on disc 2.
When all tracks for side B have finished,
disc play
stops.
The tape deck will continue recording to the end of the
tape (side B).
The edit mode remains operational
when recording
ends. Press the
button to cancel the edit mode.
3. Insert aC-50 cassette tape into the tape deck to record
side A.
-14-
..
_—
Advertisement
Table of Contents
