Pioneer f-502 Service Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Monitor
  5. f-502
  6. Service manual

Pioneer f-502 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Plasma
Plasma
Service
Service
Field
Guide
Field
Guide
2007
2007
Generations 3 to 8
Quick Reference
Troubleshooting Guide
Version 1.2

Advertisement

Table of Contents
loading

Related Manuals for Pioneer f-502

Summary of Contents for Pioneer f-502

  • Page 1 Plasma Plasma Service Service Field Guide Field Guide 2007 2007 Generations 3 to 8 Quick Reference Troubleshooting Guide Version 1.2...

  • Page 3: Table Of Contents

    Contents Preface Service Call Preparations Hour & P-Count Readings 7-10 Model & System Breakdown 11-12 Optional Accessories Quick Reference 14-22 Power Down G2~G6 Shut Down G2~G6 Power Down & Shut Down G7~G8 Trap Switch Reset G3~G8 18-19 Service Remotes 20-22 G3 PDP433PU &...
  • Page 4 Contents Continued G5 PDP4350SX & PDP5050SX 59-71 Block Diagrams 60-63 Operation LED’s Shut Down & Power Down 65-71 G6 PDP436PU, PDP506PU, PRO436PU & PRO506PU 72-81 Block Diagrams 74-75 Operation LED’s Shut Down & Power Down 77-80 System Reset G7 PDP4270/71HD, PDP5070/71HD, PDP6070/71HD, PRO507PU & PRO607PU 82-98 Block Diagrams 84-89...

  • Page 5: Preface

    Safety information harm. (California Health and Safety Code Section 25249.5). Important safety data for this Pioneer model is contained in the service manual. Before returning the unit to the customer, complete all product safety obligations and tests.
  • Page 6 4. Tech should check tips and bulletins on after account login. http://parts,pioneerelectronics.com/ 5. If there’s any uncertainty contact Pioneer Office of Technical Service. Performing service call 1. Tech should take service manual, necessary tips and bulletins, static strap, scope and HD generator with DVI and HDMI outputs.
  • Page 7 • For complete procedure or models not listed in Table 1, refer to the service manual for that model. Note: Some models have only “Hour” meters. Thank you for your cooperation and please contact your local Pioneer Office of Technical Service should you have any questions. Pioneer Electronics Service, Inc.
  • Page 8 (2/4) SI-PG06003-A Warranty Claim Example:...
  • Page 9 (3/4) SI-PG06003-A Table 1 Model Accessing Hours and P count meters Photos/Screen OPTION2 Integrator mode: In standby mode, press "Menu" then : ON "MENU" screen "Power" keys within 3 sec. In ----> BAUD RATE : 4800BPS PDP505HD FULL MASK : OFF Select "OPTION 2"...
  • Page 10 (4/4) SI-PG06003-A Table 1 Service factory mode: In standby mode, press and PANEL FACT. ARA-30602-DIG-AH release "Display" key, wait for 4 sec then press and PANEL WORKS release "Left", "Up", "Left", "Right", "Power" keys within PM-B1 00001108 M "PANEL 6 sec. Press "MUTING" key 3X --> PM-B2 00001216 M PDP436PU, PDP506PU,...

  • Page 13: Optional Accessories

    Optional Accessories Part Number Description Models PDK1000 Table Top Stand PRO800 & 1000HD PDK1014 Table Top Stand PRO1410HD PDK5001 Table Top Stand PDP501MX PWM4211 Flat wall mount bracket For 42" PWM4221 Tilt wall mount bracket For 42" PWM1011 Flat wall mount bracket(Single board) For 50"...

  • Page 14: Quick Reference

    Quick Reference G-3 to G-8 Power Down Shut Down Trap Switch Reset Service Remotes...
  • Page 15 POWER DOWN DIAGNOSIS BY LED DISPLAY BY GENERATION (GENERATION DETERMINED BY 3 # IN MODEL PDP50_XXX) RED (LED BLINKS) Panel LED only..Not Media Receiver In G2 Models the LED does not blink. Lit LED indicates problem area. BLINKS G3 * G4 * Y DRIVE MR POWER SUPPLY...
  • Page 16 SHUT DOWN DIAGNOSIS BY LED DISPLAY BY GENERATION (GENERATION DETERMINED BY 3 # IN MODEL PDP50_XXX) GREEN or BLUE (LED BLINKS) Panel LED Only..Not Media Receiver BLINKS G3 * G4 * PANEL MICRO PANEL DRIVE IC PANEL DRIVE IC HD DIGITAL COMMUNICATION COMMUNICATION DIGITAL 11C...
  • Page 17 Power Down & Shut Down Chart for & G8 Models LEDs Cause BLUE Blue １ SQ IC (Digital Ass'y) Blue ２ Module uCom IIC Communication (Digital or Sensor Ass'y) Blue ３ DIGTAL-RST2 (Digital Ass'y) Blue ４ Panel High or Low Temperature (Sensor Ass'y) Blue ５...
  • Page 18 Pioneer plasma reference 3rd to 5th generation PDP display Integrator Factory Trap Trap Media receiver Data backup w/o media mode mode indication override receiver IC1204 Digital Red blinks Enter factory G3 PU 3 or 4 PDP-R03U-SK video fast mode PRO1000HD...
  • Page 19 Trap Switch Reset Procedure G-4, G-5, G-6, G-7, G-8 • Replace media receiver, plasma panel cover, or tape down HDCP trap switch. If the model in question has the TV Guide option, the TV Guide option must be turned off before proceeding. •...

  • Page 20: Test Mode

    REMOTE CONTROL UNIT (AXD1486). 1 SCREEN SIZE button Press to select the screen size. 2 INPUT buttons Press to select the input . 3 MENU button Press to open and close the on-screen menu. 4 ADJUST ( 5 / ∞ / 3 / 2 ) buttons Use to navigate menu screens and to adjust various settings on the unit.
  • Page 21 Remote Control Keys Basic Functions Remarks MUTING Switching the main items. Shifting to the next main item (top). j (DOWN) Switching the subtitled items. Shifting downward to the next subtitiled item. i (UP) Switching the subtitled items. Shifting upward to the next upper layer. k (LEFT) Decreasing the adjustment value.
  • Page 22 Generation 4 to 8 New Test Remote GGF1589 • The keys labeled with the same names on the service remote control unit have the same functions as those of the supplied remote control unit. (See "2.3 PANEL FACILITIES.") • For the keys not provided on the supplied remote control unit, see the explanations below: GENERATION switch for remote control codes This switch selects the generation of remote control codes to be transmitted:...

  • Page 23: Block Diagrams

    Models PDP433PU PDP503PU Block Diagrams Shut-Down & Power-Down Diagnosis...
  • Page 24 PDP-433PU PDP-503PU Block Diagram Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver VADR2 VADR2 CLK/LE CLK/LE IC6501 IC6601 VADR2 ADR CONNECT A ADR CONNECT B Buffer IC Buffer IC ASSY ASSY CLAMP BGA1 Q6706 Q6711 VADR Gen...
  • Page 25 Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST". Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver VADR2 VADR2 CLK/LE CLK/LE VADR2 IC6801 IC6901...
  • Page 26 This unit has self-diagnosis functions against abnormalities in the internal circuits and other operational abnormalities, and if any abnormality is detected, the STANDBY/ON indicator (LED) blinks to alert you of it. How the indicator blinks and possible failure points and power-down points are explained below: Shutdown •...
  • Page 27 Block Diagram of the Shutdown Signal System ("STANDBY/ON" LED: Blinking in green) DIGITAL VIDEO ASSY IC1101 IC1191 Panel UCOM Panel UCOM THERMAL SENSOR external Flash ROM ASSY IC8351 DDC_SCL *PU_CE BUSY Thermal DDC_SDA REQ_PU Sensor 1 TEMP1 IC1207 Module UCOM IC1204 EEPROM A_SCL...
  • Page 28 Shutdown diagnosis 1 Panel microcomputer failure Screen display Condition : When a module microcomputer failed in communication with a panel microcomputer Results : An OSD is displayed for 30 seconds after the failure is detected; then the power is shut down. Possible causes •...
  • Page 29 PDP-433PU PDP-503PU Power Down (Blinking in RED) DIGITAL VIDEO ASSY X DRIVE ASSY X Drive X DC-DC DIGITAL DC-DC SW POWER IC1201-pin 8 SUPPLY ADR CONNECT MODULE ASSY (Upper) Address PD Mute Relay Circuit ADR CONNECT PD Circuit D1202 Cathode DIG_ADR.PD ASSY (Lower)
  • Page 30 Models PDP433CMX PDP503CMX PDP4300 PRO800HD & HDI PRO1000HD & HDI...

  • Page 31: Block Diagrams

    Block Diagrams Basic Service Factory Mode Shut-Down & Power-Down Diagnosis...
  • Page 32 PRO800HD, PRO1000HD, PDP433CMX, PDP503CMX, PDP4300 Block Diagram Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver VADR2 VADR2 CLK/LE CLK/LE IC6501 IC6601 VADR2 ADR CONNECT A ADR CONNECT B Buffer IC Buffer IC ASSY ASSY CLAMP...
  • Page 33 Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST". Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver Driver VADR2 VADR2 CLK/LE CLK/LE VADR2 IC6801 IC6901...
  • Page 34 PRO800HD, PRO1000HD, PDP433CMX, RGB ASSY PDP503CMX, PDP4300 IC5102 (PE5066ACK) SD RAM IC101 SD RAM VCLK(132) DEO(99) HDO(98) VDO(97) RAO[0 7]RBO[0 7] GAO[0 7]GBO[0 7] (LCX541) BAO[0 7]BBO[0 7] Selector IC5001 Buffer (???????) IC102 I/O ASSY (LCX125) CLK SEL IC4603 IC4004 (CXA3516R) 13.5V V+12V...
  • Page 35 DIGITAL VIDEO ASSY SD RAM SD RAM RGB ASSY 100MHz X'tal RA[0 9]RB[0 9] GA[0 9]GB[0 9] MCLKI(242) BA[0 9]BB[0 9] IC31 CLKOUT(88) (1/2) RAI[0 7]RBI[0 7] DEO(92) GAI[0 7]GBI[0 7] HDO(91) VD Shift BAI[0 7]BBI[0 7] OSDH(62) VDO(90) CLKI(286) HDI(297) IC5301 IC5602...
  • Page 36 PRO800HD, PRO1000HD, PDP433CMX, PDP503CMX, PDP4300 SERVICE FACTORY MODE Perform the operations of Service Factory mode using the Remote Control Unit provided with the Plasma Display (AXD1459). State Transition Diagram Normal Operation At standby Mode (within 3 sec.) "Menu" key (AA8B) STANDBY/ON (AA1C) ‘...
  • Page 37 PDP-433CMX, PDP-433MXE PRO800HD, PRO1000HD, PDP433CMX, PDP503CMX, PDP4300 • AXD1459 (PDP-503CMX / PDP-433CMX) POWER POWER MENU SCREEN DISPLAY CALL SIZE SCREEN SIZE FULL AUTO FULL AUTO ZOOM ZOOM DISPLAY CALL SURROUND MUTE MODE MUTE SOUND AUDIO SOUND VOLUME MENU VOLUME AV MEMORY SURROUND MODE AV SELECT...
  • Page 38 PRO800HD, PDP-433CMX, PDP-433MXE PRO1000HD, PDP433CMX, PDP503CMX, PDP4300 SHUT DOWN/POWER DOWN DIAGNOSIS BY LED DISPLAY When internal circuit abnormality and other operation abnormality occurred from this unit, self-diagnose display function by STANDBY/ON (LED) indicator is loaded. Each NG point by LED blinking and a PD (power down) point are as follows. Shut Down •...
  • Page 39 PRO800HD, PRO1000HD, PDP433CMX, PDP503CMX, Shut Down (Blinking in Green) PDP4300...
  • Page 40 PRO800HD, PRO1000HD, PDP433CMX, Power down (Blinking in Red) PDP503CMX, PDP4300...
  • Page 41 Models PDP434PU PDP504PU PRO434PU PRO504PU PDP435PU PDP505PU PRO435PU PRO505PU Block Diagrams Operation LED Statuses Power-Down & Shut-Down Diagnosis...

  • Page 42: G4 & G5 Pdp434Pu, Pdp504Pu, Pro434Pu, Pro504Pu, Pdp435Pu, Pdp505Pu Pro435Pu & Pro505Pu

    PDP434PU, PDP504PU, PRO434PU, PRO504PU, PDP435PU, PDP505PU, PRO435PU, PRO505PU Block Diagram DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC IC1551 IC1552 IC1553 IC1554 IC1555 IC1551 IC1552 IC1553 IC1554 IC1555 V+5V V+5V V+9V...
  • Page 43 DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC IC1551 IC1552 IC1553 IC1554 IC1555 IC1551 IC1552 IC1553 IC1554 IC1555 V+5V V+5V V+9V V+60V V+9V V+60V V+3V_IC5 V+3V_IC5 V+3V_LVDS V+3V_PLL V+3V_LVDS V+3V_PLL V+ADR...
  • Page 44 • Operation statuses indicated by LEDs MR-LED PANEL-LED Standby GREEN Power on GREEN Normal 1.0S 1.0S MR-AC power off GREEN 1.0S 1.0S P-AC power off GREEN 0.5S 3.0S MR power-down GREEN Abnormality MR shutdown GREEN in MR 0.5S 0.5S 0.5S 3.0S MR modification GREEN...
  • Page 45 • Identification of locations having abnormality by the number of times the LEDs flash On Shutdown and power-down Shutdown • Operation: When the microcomputer detects any abnormality, it forcibly turns off the unit. • LED indication: The green LED flashes. Power-down •...
  • Page 46 PDP434PU, PDP504PU, PRO434PU, PRO504PU, PDP435PU, PDP505PU, PRO435PU, PRO505PU • Block diagram of the shutdown signal system Note: DIGITAL VIDEO ASSY The figures 1 - 5 indicate the number of times the LED flashes when shutdown occurs in the corresponding route. IC5401 IC5301 TXD_IC4...
  • Page 47 Power Down (Blinking in Red) Note: DIGITAL VIDEO ASSY The figures 1 - = indicate the number of times the LED flashes on the panel when power-down occurs in D5 -D8 the corresponding route. ADDRESS ASSY (upper) ADR_ PD IC5214 IC5215 D9 -D12 ADDRESS ASSY...
  • Page 48 Models PDP434CMX PDP504CMX PDP505CMX PDP4304 PDP4314 PDP5004 PDP5014 PRO810HD PRO1010HD...

  • Page 49: Block Diagrams

    Block Diagrams Operation LED Statuses Power-Down & Shut-Down Diagnosis...
  • Page 50 PDP434CMX, PDP504CMX, PDP505CMX Block Diagram DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC IC1551 IC1552 IC1553 IC1554 IC1555 IC1551 IC1552 IC1553 IC1554 IC1555 V+5V V+5V V+9V V+60V V+9V V+60V V+3V_IC5 V+3V_IC5...
  • Page 51 PDP5004, PDP5014, PDP4304, PDP4314, PRO810 & PRO1010 DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC IC1551 IC1552 IC1553 IC1554 IC1555 IC1551 IC1552 IC1553 IC1554 IC1555 V+5V V+5V V+9V V+60V V+9V V+60V...

  • Page 52: Comm Slot Assy

    PDP434CMX, PDP504CMX, PDP505CMX • Block Diagram CN5002 V+16 AV I/O ASSY IC7606 IC5002 +L/+R INPUT 1 IC7602 IC7605 AUDIO IN IC5003 IC7603 IC7601 POWER AMP INPUT 2 VOLUME IC7607 SELECTOR AUDIO IN -L/-R V+12V V+3V V+6.5V AUDIO AMP ASSY IC7608 AUDIO OUT SELECTOR LEG_R...
  • Page 53 SP TERMINAL L ASSY SP TERMINAL R ASSY SIDE KEY CN5002 FAN L FAN R ASSY CN7408 CN7404 CN7402 CN7205 V+1V V+3V V+3V V+6.5V _STB V+16.5V FAN_12V RGB H/V IC5701 RGB H/V PD6435A IC7004 IC7101 PD5855A PE5362A CN5001 IC5801 PD6435A TXD_MD RXD_MD IC6483...
  • Page 54 PDP434CMX, PDP504CMX, PDP505CMX • Operation statuses indicated by LEDs Standby GREEN Normal Power on GREEN 0.5s 0.5s 0.5s 3.0s Power-down GREEN Abnormality Shutdown 0.5s 0.5s 0.5s 3.0s GREEN 0.3s 0.3s Interval Slot Protect 0.3s 1.5S 0.3s GREEN Note: Lit in green Not lit Lit in red Red &...
  • Page 55 • Identification of locations having abnormality by the number of times the LEDs flash On Shutdown and power-down Shutdown • Operation: When the microcomputer detects any abnormality, it forcibly shuts the unit off. • LED indication: The LED flashes in green. Note: The LED flashes regardless of the FRONT INDICATOR setting on the Integrator menu.
  • Page 56 Power Down (Blinking in Red) Note: DIGITAL VIDEO ASSY The figures 1 - @ indicate the number of times the LED flashes on the panel when power-down occurs in D5 - D8 the corresponding route. ADDRESS ASSY (upper) ADR_ PD IC5214 IC5215 D9 -D12...
  • Page 57 DIGITAL VIDEO ASSY Shut Down (Blinking in Green) IC5301 3.3V-RST IC5302 (PST3628UR) RGB ASSY (SN74AHC08PW) IC7004 IC7101 IC5303 (PE5362A) (PD5855A) 1.5V-RST SP TERMINAL L ASSY (PST3612UR) IC7206 IC7210 3.3V-RST 1.5V-RST IC9752 TEMP3 (PST3628UR) (PST3612UR) TXD_IC2 TXD_IC3 THERMAL RXD_IC2 RXD_IC3 SENSOR CLK_IC2 CLK_IC3 IC5206...
  • Page 58 Shut Down (Blinking in Green) DIGITAL VIDEO ASSY SP TERMINAL L ASSY IC5301 3.3V-RST IC9752 TEMP3 IC5302 (PST3628UR) THERMAL RGB ASSY SENSOR (SN74AHC08PW) IC7004 IC7101 IC5303 (PE5362A) (PD5855A) 1.5V-RST (PST3612UR) IC7206 IC7210 3.3V-RST 1.5V-RST (PST3628UR) (PST3612UR) TXD_IC2 TXD_IC3 RXD_IC2 RXD_IC3 CLK_IC2 CLK_IC3 IC5206...
  • Page 59 Models PDP4350SX PDP5050SX Block Diagrams Operation LED Statuses Shut-Down & Power-Down Diagnosis...
  • Page 60 PDP4350SX & PDP5050SX Block Diagram DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC IC1551 IC1552 IC1553 IC1554 IC1555 IC1551 IC1552 IC1553 IC1554 IC1555 V+5V V+5V V+9V V+60V V+9V V+60V V+3V_IC5 V+3V_IC5...
  • Page 61 DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC DRIVER IC IC1551 IC1552 IC1553 IC1554 IC1555 IC1551 IC1552 IC1553 IC1554 IC1555 V+5V V+5V V+9V V+60V V+9V V+60V V+3V_IC5 V+3V_IC5 V+3V_LVDS V+3V_PLL V+3V_LVDS V+3V_PLL V+ADR...

  • Page 62: Key Control

    PDP4350SX & PDP5050SX ANT.A OPT. POD CARD SLOT AC SEPA ASSY LIVE_IN PANEL POWER SUPPLY UNIT NEUTRAL TO AV BOARD ASSY U7501 IC5501 (ANALOG) BCM7021 CN9473 LIVE_IN NEUTRAL IC5201 BUS BRIDGE GATE ARRAY IC4007 IC8501 V+3.3 V+3.3 V+6.5 MR POWER SUPPLY UNIT 3D Y/C VD V+1.8 V+2.5...
  • Page 63 TUNER BOARD ASSY MAIN BOARD ASSY IC7501 DIGITAL VIDEO Y0-Y7,UV0-UV7 GATE ARRAY IC2002 IC3001 DEMOD. TUNER TXD_DT,RXD_DT UCOM V+3.3 V+6.5 +30V V+12V CN1002 CN8502 V+1V AV11 V+3V U8502 CONVERTER V+3V_ V+6V UCOM IC8506 IC7004 PM SWITCH IC6402 CELIA AD(MAIN) V+3V_ IC6406 MIX(MAIN) IC6107...
  • Page 64 PDP4350SX & PDP5050SX • LED-lighting patterns Standby GREEN ORANGE Power ON GREEN Normal ORANGE Function wait Power supply state of PANEL power supply is GREEN OFF and power supply state of MR power supply is in standby mode. Note 1 ORANGE Power-down GREEN...
  • Page 65 Note: Shut Down (Blinking in Green) The figures 1 - ! indicate the number of times the Green-LED flashes when shutdown occurs in the corresponding route. SR ASSY MAIN BOARD ASSY FAN1 FAN2 IC7004 IC7101 CELIA MIKE TXD_IC2, DIGITAL VIDEO ASSY TXD_IC3, RXD_IC3, RXD_IC2, CLK_IC3, IC3_CE, IC3_BUSY...
  • Page 66 PDP4350SX & PDP5050SX • Diagnosis of the shutdown No. of times of Possible LED flashing Category SD Circuit in operation Defective Assy Reason for shutdown Point to be Checked Defective Remarks Category Part IC4 BLOCK, IC5401 Communication failure of IC4 Communication failure of the Green 1 DIGITAL VIDEO Assy...
  • Page 67 No. of times of Possible LED flashing Category SD Circuit in operation Defective Assy Reason for shutdown Point to be Checked Defective Remarks Category Part Failure in MICHAEL (MAIN) or defective peripheral circuits MICHAEL BLOCK IC6107 Failure in MICHAEL (SUB) or defective peripheral circuits MICHAEL BLOCK IC6255 Failure in AD (MAIN) or defective peripheral circuits...
  • Page 68 Power Down (Blinking in Red) Note: DIGITAL VIDEO ASSY The figures 1 - ~ indicate the number of times the Red-LED flashes when power-down occurs in the corresponding route. D5-D8 ADDRESS ASSY (upper) IC5214 IC5215 ADR_PD D9-D12 ADDRESS ASSY (lower) DC-DC CONVERTER PANEL POWER SUPPLY UNIT...
  • Page 69 PD Circuit in Defective Assy Reason for Power-down Point to be Checked Possible Defective Part Remarks operation MR POWER SUPPLY Unit MR POWER If the elapsed time from relay-on until the LED PANEL POWER in the PANEL power supply unit lights is about 2-4 seconds, the defective assembly may be SUPPLY Unit 2 POWER...
  • Page 70 G-5SX Models (PDP-4350SX & PDP-5050SX) • Diagnosis of the shutdown No. of times of Possible LED flashing Category SD Circuit in operation Defective Assy Reason for shutdown Point to be Checked Defective Remarks Category Part IC4 BLOCK, IC5401 Communication failure of IC4 Communication failure of the Green 1 DIGITAL VIDEO Assy...
  • Page 71 G-5SX Models (PDP-4350SX & PDP-5050SX) No. of times of Possible LED flashing Category SD Circuit in operation Defective Assy Reason for shutdown Point to be Checked Defective Remarks Category Part Failure in MICHAEL (MAIN) or defective peripheral circuits MICHAEL BLOCK IC6107 Failure in MICHAEL (SUB) or defective peripheral circuits MICHAEL BLOCK...
  • Page 72 Models PDP436PU PDP506PU PRO436PU PRO506PU...
  • Page 73 Block Diagrams Operation LED Statuses Shut-Down & Power-Down Diagnosis System Reset...

  • Page 74: Hd Audio Assy

    PDP436PU, PDP506PU, PRO436PU, PRO506PU Block Diagram 50 SCAN B ASSY (UPPER) Scan Signal 50 Y DRIVE ASSY IC2801 IC5V Scan IC PSUS VSUS VOFS Vprst IC5V IC2802 VH DC/DC Conv. Offset Scan IC + Reset Block Vprst Block Vprst Reg. IC2803 +5V +16.5V VSUS...

  • Page 75: Hd Digital Assy

    : Wire haerness : FFC SECONDARY PRIMARY POWER SUPPLY Switching UNIT Q703 T702 SUS CLAMP 1 VSUS Q704 ASSY Switching D103 VSUS +390V +16.5V PFC Q101 Switching +6 5V Q102 Q901 T902 Q103 Q902 VSUS_CONT Switching +60V D109 IC202 50 X DRIVE ASSY T101 +16.5V IC101...
  • Page 76 PDP436PU, PDP506PU, PRO436PU, PRO506PU • Operation statuses indicated by LEDs Status LED Pattern Standby Blue Lit in Red Lit in Blue Blue Power ON Red flashes AC Power OFF of Blue (1000ms) one side 1000ms Red and System cable blue flash Blue 1000ms disconnection...
  • Page 77 Shut Down (Blinking in Blue) HD DIGITAL ASSY IC3401 Sequence Processor IC3302 TXD_SQ 3.3V-RST RXD_SQ HD AUDIO ASSY IC3303 CLK_SQ CE_SQ IC3304 BUSY_SQ 1.2V-RST RST2 A_NGB IC3751 IC3156 Amp. EEPROM E_SCL IC3151 IC3754 E_SDA Module UCOM IC3158 EEPRON Temp. TEMP1 Sensor IC3753 WOW + Volume IC...
  • Page 78 Power Down (Blinking in Red) Number PD Circuit in Defective PCB Reason for PD Point to be Checked Possible Defective Part Remarks of Blinks Operation Assy (Power-down) POWER POWER SUPPLY 50 (43) SCAN A, B SCAN IC SCAN IC VH-GNDH short-circuit VSUS-SUSOUT, VH UVP Y SUS BLOCK...
  • Page 79 PDP436PU, PDP506PU, PRO436PU, PRO506PU LED-lighting patterns Status of the Unit LED-lighting Pattern Standby, Lit in red power management Power on Lit in blue Flashing in red PDP's power not on (at 1-sec intervals) 1sec 1sec Flashing alternately in red System cable disconnected * and blue (at 1-sec intervals) Waiting for start of rewriting 100msec...
  • Page 80 PDP436PU, PDP506PU, PRO436PU, PRO506PU Defective points assumed from the number of times of LED flashing No. of times of LED flashing Site detected as OSD when detected Category LEDs on the MR Possible defective points (representative examples) LEDs on the panel ∗1 (warning message) defective...
  • Page 81 PDP436PU, PDP506PU, PRO436PU, PRO506PU SYSTEM RESET THROUGH SERVICE MODE After Replacing Main Assy in G-6 Media Receiver or G-7 panel TV Guide option must be turned off TO TURN OFF TV GUIDE In order to enter Service Mode, TV guide must be turned off In order to do this procedure you must have and use the correct remote.
  • Page 82 Models PDP4270HD PDP4271HD PDP5070HD PDP5071HD PDP6070HD PDP6071HD PRO507PU PRO607PU...
  • Page 83 Block Diagrams Quick Reference Power-Down & Shut-Down Diagnosis System Reset Power Supply Jumper...
  • Page 84 PDP4270HD, PDP4271HD, PDP5070HD, PDP5071HD, PRO507PU Block Diagram 50 SCAN B ASSY (HIGH SIDE) VH IC5V Scan S gnal Scan IC PSUS IC2901 VH IC5V Scan IC IC2902 VSUS +16 5V 50Y SUB DRIVE VH IC5V PSUS Scan IC MASK IC2903 BLOCK VH IC5V Scan IC...
  • Page 85 SECONDARY PRIMARY POWER SUPPLY UNIT +16 5V Sw tch ng +6 5V T251 Q253 VSUS Q252 +16 5V Switching +6 5V RC101 VSUS CONT +390V PFC Q203 Z901 Q204 +60V T281 Z281 50X SUB DRIVE Switching +16 5V +16 5V +5V VSUS +12V STB3 3V PSUS...
  • Page 86 50 DIGITAL Assy POWER SUPPLY UNIT TRAP SW SIDE KEY ASSY AUDIO V+3.3V_STB Assy KEY_AD2 KEY_AD1 VOL + TV_GUIDE POWER VOL - CH - INPUT LED/IR ASSY MAIN ASSY V+5.1V_STB IC9702 POD ASSY 50 LED ASSY TANSHI ASSY SIDE ASSY...
  • Page 87 Models PDP6070HD PDP6071HD PRO607PU Block Diagrams on the next two pages...
  • Page 88 Block Diagram PDP6070HD, PDP6071HD, PRO607PU POWER SW POWER SW INLET POWER SUPPLY UNIT POWER SUPPLY UNIT STB 3 3V CONVERTER STB 5 1V SERIES FILTER BLOCK +35V BLOCK +16 5V LVDS RESONANT DK BLOCK LVDS DK BLOCK LVDS LVDS DK BLOCK DK BLOCK RECEIVER RECE VER...
  • Page 89 V+3V D V+3V D LED R LED B V+3V D MSEL V+3VACT YOBI 60 DIGITAL ASSY SIDE KEY SIDE KEY 60 IR ASSY 60 IR ASSY ASSY ASSY 42 & 60 LED 42 & 60 LED ASSY ASSY SIDE ASSY SIDE ASSY TANSHI ASSY TANSHI ASSY...
  • Page 90 PDP4270HD, PDP4271HD, PDP5070HD, PDP5071HD, PRO507PU PDP6070HD, PDP6071HD, PRO607PU How to enter the Factory Mode by Remote control. Quick Reference upon Service Visit 1 ① Turn off the TV Guide feature Notes, PD/SD diagnosis, and methods for various settings ② Set unit to Standby Mode ③...
  • Page 91 PDP4270HD, PDP4271HD, PDP5070HD, PDP5071HD, PRO507PU PDP6070HD, PDP6071HD, PRO607PU Quick Reference upon Service Visit 2 Mode transition and structure of layers in Service Factory mode Mode transition in Service Factory mode Structure of Layers in Service Factory Mode • To shift to another mode, press [MUTING]. INFORMATION mode •...
  • Page 92 Power Down (Blinking in Red) Note: The figures indicate the number of times the LED flashes when power-down occurs in the corresponding route. 50 DIGITAL ASSY DRF_B D15 to D18 D3501 ADR_PD POWER SUPPLY UNIT 50 ADDRESS ASSY D3502 D3151 IC3155 XDRIVE_PD 50X DRIVE ASSY...
  • Page 93 PDP4270HD, PDP4271HD, PDP5070HD, PDP5071HD, PRO507PU PDP6070HD, PDP6071HD, PRO607PU Prediction of failure symptoms when a PD (power-down) is generated LED Flashing PD Circuit Checkpoint Main Cause Count Power supply PD POWER SUPPLY Unit Failure in the POWER SUPPLY Unit 50 SCAN A, B Assy SCAN IC is damaged (short-circuiting between VH and GNDH) Connectors disconnected between the POWER SUPPLY Unit and the Y DRIVE Assy SCAN PD...
  • Page 94 Shut Down (Blinking in Blue) Note : The figures indicate the number of times the LED flashes when shut-down occurs in the corresponding route. MAIN ASSY 50 DIGITAL ASSY IC5401 IC5101 IC5301 IC8401 HDMI_RX M-VDEC MAIN_ucom TXD_SQ IC8101 IC3160 SCL_MA RXD_SQ IC3401 MONO...
  • Page 95 PDP4270HD, PDP4271HD, PDP5070HD, PDP5071HD, PRO507PU PDP6070HD, PDP6071HD, PRO607PU SD (SHUT DOWN) DIAGNOSIS Log Indication in Factory Mode Possible Defective Frequency of Major Type Detailed Type Checkpoint Remarks Part LED Flashing MAIN Communication error RTRY CLK_SQ/TXD_SQ, etc. IC3151, IC3401 SQ_IC communication not established Drive stop SQNO Check if the video sync signal is input to IC3401.
  • Page 96 8 bits each. In a case of color difference 4:2:2, Y, Cb, and Cr use 12 bits each, but Cb and Cr are transmitted at a half sampling rate of Y. This unit is capable of processing the upper 10 bits out of 12 bits of video data. Recent high-end DVD players, such as Pioneer DV-79AVi, are capable of outputting 10-bit color- difference signals.
  • Page 97 PDP4270HD, PDP4271HD, PDP5070HD, PDP5071HD, PRO507PU PDP6070HD, PDP6071HD, PRO607PU SYSTEM RESET THROUGH SERVICE MODE After Replacing Main Assy in G-6 Media Receiver or G-7 panel TV Guide option must be turned off TO TURN OFF TV GUIDE In order to enter Service Mode, TV guide must be turned off In order to do this procedure you must have and use the correct remote.
  • Page 98 PDP4270HD, PDP4271HD, PDP5070HD, PDP5071HD, PRO507PU PDP6070HD, PDP6071HD, PRO607PU Procedure of Changing Jumper Connector after replacing the Power Supply Unit When replacing the Power Supply Unit, it is necessary to perform the following connector changes. Otherwise the unit cannot work properly and the unit may be damaged. Therefore perform these connector settings without fail when replacing the Power Supply Unit.

  • Page 99: Operation Led's

    Model PDP427CMX PDP507CMX PDP607CMX Block Diagrams Operation LED's Power-Down & Shut-Down Diagnosis...
  • Page 100 PDP427CMX, PDP507CMX Block Diagram SCAN B ASSY (HIGH SIDE) VH IC5V Scan S gnal Scan IC PSUS IC2901 VH IC5V Y SUB DRIVE ASSY Scan IC IC2902 VSUS +16 5V VH IC5V PSUS Scan IC MASK IC2903 BLOCK VH IC5V Scan IC IC2904 VOFS...
  • Page 101 SECONDARY PRIMARY POWER SUPPLY UNIT +16 5V Swi ching +6 5V T251 Q253 VSUS Q252 +16 5V Switch ng +6 5V RC101 VSUS CONT +390V PFC Q203 Z901 Q204 +60V T281 Z281 Sw tching +16 5V +12V STB3 3V X SUB DRIVE ASSY VSUS ADJ D123 PS PD...
  • Page 102 PDP427CMX, PDP507CMX COMMSLOT ASSY KEY ASSY COMMSLOT IF ASSY CN2001 IC2001 RS-232C IC2201 IC2002 IC2003 Key scan 9p D-sub IC2004 u-COM 232C JA2002 IC2005 Combination in Transceiver IC2006 6p mini-DIN IC2301 X2201 IC2007 JA2003 3.84MHz Combination out 6p mini-DIN CN9011 MAIN ASSY IC7001 CN7001...
  • Page 103 LED2 ASSY SENB ASSY SENC ASSY SEND ASSY U2401 Remote Control Receiver IC1001 IC1201 IC1101 D2402 +3.3V +3.3V +3.3V CN1001 D2401 CN1101 CN1201 Opt. Sense CN9010 CN9501 Temp Sensor (SDA, SCL) +12V +3.3V IC9501 D9003, u-COM ALARM IC6501 Detect Converter X9501 IC9503 33.33MHz...
  • Page 104 Block Diagram PDP607CMX INLET FILTER POWER SW BLOCK 60 ADDRESS L ASSY 60 ADDRESS S ASSY 607 SCAN B ASSY SCAN RELAY SCAN BLOCK 60Y DRIVE ASSY IC2901 DCDC-CON VOLTAGE +16.5V CONVERTER SCAN IC2902 BLOCK MASK MASK MODULE MODULE SCAN IC2301 IC2301 +16.5V...
  • Page 105 STB 3.3V CONVERTER +6.5V SERIES BLOCK +12V +16.5V RESONANT +6.5V CONV.1 DC/DC VOC CONV. BLOCK +3.3V DC/DC +12V LVDS LVDS DK BLOCK DK BLOCK VOLTAGE RECEIVER RECEIVER DOUBLER IC 1801 IC 1601 STB 3.3V 60 ADDRESS L +12V 60 ADDRESS S RELAY ASSY ASSY...
  • Page 106 PDP427CMX, PDP507CMX, PDP607CMX Status LED Lighting Pattern Remarks Power OFF Not lit (Indicator OFF) Green Power ON Green: Lit (Indicator ON) Green Red: Lit Standby Green Green flashes at intervals Power Management of 1000ms 1000ms 1000ms Green Red flashes at intervals of 500ms 500ms 500ms 2500ms...
  • Page 107 Power Down (Blinking in Red) Note: The figures indicate the number of times the LED flashes when power-down occurs in the corresponding route. 50 DIGITAL ASSY DRF_B D15 to D18 D3501 ADR_PD POWER SUPPLY UNIT 50 ADDRESS ASSY D3502 D3151 IC3155 XDRIVE_PD 50X DRIVE ASSY...
  • Page 108 PDP427CMX, PDP507CMX, PDP607CMX Prediction of failure symptoms when a PD (power-down) is generated LED Flashing PD Circuit Checkpoint Main Cause Count Power supply PD POWER SUPPLY Unit Failure in the POWER SUPPLY Unit 50 SCAN A, B Assy SCAN IC is damaged (short-circuiting between VH and GNDH) Connectors disconnected between the POWER SUPPLY Unit and the Y DRIVE Assy SCAN PD 50Y DRIVE Assy...
  • Page 109 Shut Down (Blinking in Blue) COMMSLOT MAIN ASSY DIGITAL ASSY ASSY TXD_SQ CN2303 RXD_SQ IC3160 CLK_SQ IC3401 IC1001 MONO CE_SQ SQ IC VCC- IIC Communication MULTI BUSY_SQ DOWN2 Failure SENB ASSY Detect Temp. Failure SQ_SD COMMSLOT IC1101 IF ASSY PSIZE SENC ASSY IC3302 IC3151...
  • Page 110 PDP427CMX, PDP507CMX, PDP607CMX Log Indication in Factory Mode Possible Defective Frequency of Major Type Detailed Type Checkpoint Remarks Part LED Flashing MAIN Communication error RTRY CLK_SQ/TXD_SQ, etc. IC3151, IC3401 SQ_IC communication not established Drive stop SQNO Check if the video sync signal is input to IC3401. CN3001, IC3401 If the signal detection by the module microcomputer is properly performed, the unit operates on an external sync.

  • Page 111: Operation Led's

    Models PDP4280HD PDP5080HD Block Diagrams Quick Reference Basic Service Mode Operation LED Statuses Shut-Down & Power-Down Diagnosis...
  • Page 112 PDP4280HD, PDP5080HD Block Diagram 50 SCAN B ASSY (HIGH SIDE) VH IC5V Scan Signal Scan IC PSUS IC2901 VH IC5V 50 Y DRIVE ASSY Scan IC IC2902 +6 5V IC5V VSUS +16 5V VSUS VH IC5V REGULATOR +16 5V VADR Scan IC IC2903 BLOCK...
  • Page 113 PDP4280HD, PDP5080HD POWER SUPPLY UNIT SECONDARY PRIMARY +16 5V Switching +6 5V T251 Q253 VSUS Q252 +16 5V Switching +6 5V RC101 VSUS CONT +390V PFC Q203 Z901 Q204 +60V T281 TANSHI +16 5V Z281 VSUS ADJ Switching +12V DRF SW B DRF B AC INLET EXT PD...
  • Page 114 PDP4280HD, PDP5080HD Quick Reference upon Service Visit 1 Notes, PD/SD diagnosis, and methods for various settings Notes when visiting for service PD/SD 1. Notes when disassembling/reassembling LED Display Information No. of LEDs 1 Rear case flashing Item When reassembling the rear case, the screws must be tightened in a TRAP SW specific order.
  • Page 115 PDP4280HD, PDP5080HD Quick Reference upon Service Visit 2 Mode transition and structure of layers in Service Factory mode Mode transition in Service Factory mode Structure of Layers in Service Factory Mode • To shift to another mode, press [MUTING]. INFORMATION mode •...
  • Page 116 PDP4280HD, PDP5080HD LED Pattern POWER STANDBY SLEEP State LED Pattern Remarks AC OFF or Main power switch OFF Standby power management Power ON (Screen ON) Once Twice n times 2.5s Once Power-down 500ms 500ms Shutdown Once Twice n times 2.5s Once The LEDs flash only while the panel is No digital adjustment...
  • Page 117 Power Down (Blinking in Red) Note: The figures indicate the number of times the LED flashes when power-down occurs in the corresponding route. DIGITAL ASSY D15 to D18 D3501 ADDRESS ASSY POWER SUPPLY UNIT ADR PD D3502 DRF SW D3151 DRF SW X DRIVE ASSY IC3155...
  • Page 118 PDP4280HD, PDP5080HD Prediction of failure symptoms when a PD (power-down) is generated Red LED Operating Defective Assy PD Outline Checkpoint Possible Defective Part Remarks Flashing Count Failure in the POWER SUPPLY Unit POWER SUPPLY Unit Q1219,Q1220,Q1221, VSUS-PSUS and SUSOUT- X SUS BLOCK X DRIVE Assy Q1222,Q1223,Q1224,Q1201 SUSGND are short-circuited.
  • Page 119 Shut Down (Blinking in Blue) PDP4280HD, PDP5080HD Note : The figures indicate the number of times the LED flashes when shut-down occurs in the corresponding route. DIGITAL ASSY MAIN ASSY IC8401 IC5201 IC4801 IC8404 TXD_SQ EMMA2 ucom HDMI_RX VDEC UART EEPROM STOP_SQ RXD_SQ...
  • Page 120 Scan IC Troubleshooting Blue Glue Removal IC Removal...

  • Page 122: Required Equipment

    1. Peel the coating a little at the place of lower left corner of SCAN IC which has rather more coating. (Please be careful not to damage the pattern.) 2. Make a notch at the peeled coating. PIONEER CORPORATION Memo: SY61 K.MATSUMURA ,MANAGER...
  • Page 123 ( 2/3) 3. Pick up the peeled coating by tweezers, and wind them around the point of the tweezers while rotating tweezers. 4. Peel off the coating while rotating tweezers along the SCAN IC. 5. All the coating around SCAN IC is peeled off, the work is end. If you rotate tweezers as close as SCAN IC, the work goes well.
  • Page 124 How to replace the SCAN ICs There are two possiblities: Work ESD safe - with a nozzle type soldering station - with the CHIPQUICK SMD1 removal kit With nozzle type desoldering station Heat up all pins with Mount the right type Add solder to all pins the nozzle.When solder reflows of nozzle...
  • Page 125 With Chipquick Another way to remove SMDs is with a special solder made by Chip Quik.The solder is an alloy of tin, lead, indium, and bismuth. Bismuth has a very low thermal conductivity. If it is mixed with tin, the melting point is reduced to 65°C. and so it becomes difficult to damage the PCB .
  • Page 126 Parts List G3 to G8 Note: This is a basic field use parts list. Always check with Pioneer Parts Department to ensure correct part numbers.
  • Page 127 3rd generation 43" PLASMA Quick Reference Chart PDP-433CMX PDP-4300 PRO800HDI PDP-433PU PRO800HD (2) AXY1056 or (7) 59 (7) AXY1059 (7) AXY1059 (2) AXY1056 or (7) 59 Power Supply Module (7)AXX1064 (2201-15940) (0-3480) must check (2761-10130) (7) must check (3) New Scan IC S/N 5011 3811 Service Panel Assy...
  • Page 128 3rd generation 50" PLASMA Quick Reference Chart PDP-503CMX PRO1000HDI PDP-503PU PRO1000HD (1,2) AXY1053, 55 or 59 AXY1059 (1,2) AXY1053, 55 or 59 Power Supply Module (7)AXX1064 (8541-35690) (7) AXX1064, must check (7) AXX1064 (2431-12680) (7) must check (3) New Scan IC S/N 9991 3051 (2,3) AWU1068...
  • Page 129 4th generation 2 piece PLASMA Quick Reference Chart PRO504PU PDP504PU PRO434PU PDP434PU Service Panel Assy AWU1080, 1108 (1) AWU1079, 1109 (1) Scan IC AN16003A SN755864APZP Power Supply Module AXY1068 AWV2018, 70 Digital Video Assy or AWV2110 AWV2035, 68 AWV2144, 47 Y Drive Assy AWV2022, 66 X Drive Assy.
  • Page 130 4th generation 43" PLASMA Quick Reference Chart PDP4304 PDP4304/1 PDP434CMX PRO810HD PRO810HD/1 PDP-434CMX/1 PDP4314 PDP4314/1 AWU1094 Service Panel Assy AWU1109 AWU1115 AWU1109 Scan IC SN755864APZP SN755866PZP Power Supply Module AXY1083 Digital Video Assy AWV2100 or 84*** AWV2169 AWV2100 Y Drive Assy AWV2022, 66 AWV2078 X Drive Assy.
  • Page 131 4th generation 50" PLASMA Quick Reference Chart PDP-5004 PDP-504CMX/1 PDP-5004/1 PDP-5014 PDP505CMX PDP-5014/1 PRO1010HD PRO1010HD/1 PDP-504CMX AWU1095 Service Panel Assy AWU1108 AWU1114 AWU1097 AWU1108 Scan IC AN16003A AN16021AA Power Supply Module AXY1083,1106 Digital Video Assy AWV2248 AWV2169 AWV2100 or 84*** AWV2100 AWV2035, 68 AWV2144...
  • Page 132 5th generation PLASMA Quick Reference Chart PDP505PU PDP4350SX PDP5050SX PRO505PU PRO435PU PDP435PU Start of serial # xxSS xxPM Service Panel Assy AWU1126 AWU1131 AWU1097 AWU1096 Power Supply Module AXY1085, 1107* AWV2074, 2180 or Digital Video Assy AWV2181 2235** Scan IC SN755866PZP AN16021AA SN755866PZP...
  • Page 133 Pioneer 42" & 61" Plasma parts & board assy interchageability list Applicable models: PDP4214HD, PDP42A3HD, PRO1410HD, PDP614MX, PDP6100HD, PDP424MV Part description Latest Part # Old part # Remarks PDP Module 9S900116 9S900077, 3S361002 9S900064 3S342013 PDP-NP42H5MF01PA Power Unit 3S110165 3S110164, 161...
  • Page 134 Pioneer 42" & 61" Plasma parts & board assy interchageability list Applicable models: PDP4214HD, PDP42A3HD, PRO1410HD, PDP614MX, PDP6100HD, PDP424MV Part description Latest Part # Old part # Remarks Data Relay Board (Left Down) 9S899895 (Ver 02A) Data Relay Board (Right Down)
  • Page 135 PDP425CMX Quick Reference Chart PDP-425CMX Service Panel Assy AWU1160 Scan IC SN755870PZT Power Supply Module AXY1127 MD Digital Assy AWV2254 Y Drive Assy AWV2251 X Drive Assy. AWW1067 Main Assy. AWW1100 Audio Assy AWW1105 Address Assy AWV2253 Sus Clamp 1 AWV2250 Sus Clamp 2 AWV2205...
  • Page 136 6th generation PLASMA Quick Reference Chart PRO506PU PDP506PU PRO436PU PDP436PU Service Panel Assy AWU1134 AWU1135 Power Supply Module AXY1112, AXY1129 Digital Video Assy AWW1028 Y Drive Assy AWV2258 AWV2256 X Drive Assy. AWW1075 AWW1074 HD Audio Assy AWV2203 HD LED Assy AWW1029 HD IR Assy AWW1030...
  • Page 137 PDP4216HD PDP5016HD Service Panel Assy AWU1208 AWU1233 Power Supply AXY1153 AXY1153 Module Digital Assy AWW1138 AWW1139 Y Drive Assy AWV2400 AWW1145 Y Sub Drive AWW1146 X Drive Assy. AWW1196 AWW1143 X Sub Drive AWW1144 INTERFACE ASSY AWV2373 AWV2373 SUS CLAMP 1 Assy AWW1022 SUS CLAMP 2 Assy AWW1023...
  • Page 138 7th Generation Plasma Quick Reference Chart THIS IS NOT A COMPLETE LIST OF PARTS! PLEASE CHECK THE SERVICE MANUAL FOR PARTS NOT LISTED HERE. PDP-4270HD PDP-5070PU PDP-6070PU PRO-940HD PRO-507PU PRO-607PU PRO-FHD1 PDP-4271HD PDP-5071PU PDP-6071PU AXY1149 AXY1149 POWER SUPPLY AXY1150 AXY1153 AXY1150 AXY1153 AXY1139...
  • Page 139 7th generation Plasma Quick Reference Chart PRO1140HD PDP5071PU PDP4271PU Service Panel Assy AWU1212 AWU1208 Power Supply Module AXY1135 Digital Assy AWW1139 AWW1138 Y Drive Assy AWW1145 AWV2334 Y Sub Drive AWW1146 X Drive Assy. AWW1143 AWW1067 X Sub Drive AWW1144 Audio Assy AWW1131 AWW1185...
  • Page 140 PROFHD 1 Quick Reference Chart PROFHD1 Service Panel Assy AWU1198 Power Supply Module AXY1134 FHD Main Assy AWV2292 FHD Digital Assy AWW1115 FHD Y Drive Assy AWV2294 FHD X Drive Assy. AWV2293 FHD Scan A Assy AWW1129, 1229* FHD Scan B Assy AWW1130, 1230* FHD Power Amp Assy AWW1117...
  • Page 141 8th Generation PLASMA Quick Reference Chart THIS IS NOT A COMPLETE LIST OF PARTS! PLEASE CHECK SERVICE MANUALS AND IF THERE IS ANY DOUBT ABOUT THE PART NUMBER PLEASE CALL THE TECHNICAL ASSISTANCE LINE TO DETERMINE THE CORRECT PART NUMBER. PDP4280HD PRO-950HD PDP5080HD...

This manual is also suitable for:

Pro-506pu

Table of Contents