Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Riotoro CR1080
Summary of Contents for Riotoro CR1080
- Page 1 RIOTORO CR1080 Installation Guide...
- Page 2 Thank you for purchasing the RIOTORO CR1080 Computer Case The CR1080 chassis squeezes raw computing power into in a cool, quiet and elegant PC that compliments any office while occupying minimal little desk space for a full ATX solution. The CR1080 achieves this by combining a small product supporting ATX, Micro ATX and Mini-ITX .
-
Page 3: Key Installation Points
Key Installation Points... -
Page 4: Before You Begin
Remove each panel by slide the panel toward the rear. Install the motherboard The CR1080 is compatible with up to Full ATX, enabling you to build a high-performance compact PC. Let’s install one. - Page 5 Attach the motherboard to the standoffs with the provided motherboard screws. Install Hard Drives and SSDs The CR1080 has one 3.5” dedicated bay and two 2.5” drive bays. That can be adapted into a 3.5 “if desired to. These bays are located in the compartment behind the motherboard tray To install a 3.5”...
- Page 6 To install drives into the 2.5” mounts The CR480 case has two mounts for 2.5” drives such as solid state drives (SSD). To mount a 2.5 drive: Remove the thumbscrew that holds the SSD Bridge attached to the main body this will allow the user to open the Cage Bridge.
-
Page 7: Install The Optical Drive
Attach Cables Connect the Front Panel Switches and LEDs The CR1080 front panel switches, LEDs, and USB ports have wire leads that need to be attached to header pins the motherboard. Refer to your motherboard manual to locate the proper motherboard header pins and attach the cable connectors listed below. - Page 8 Fans (2) Attach the case fan cables The CR1080 comes with two 120mm fans—a front intake fan and a rear exhaust fan. 1. Connect the 3-pin connector of each fan to a 3-pin PWM fan header on your motherboard. Refer to your motherboard manual for more information.
-
Page 9: Install The Power Supply
Install the Power Supply The power supply unit (PSU) drive bay is located on the bottom of the case. 1. Slide the PSU in the case PSU bay Push the power supply to the rear 2. Align the PSU and case mounting holes and attach the power supply to the case with the provided PSU screws. -
Page 10: Specifications
Specifications Motherboard support ATX, Micro ATX, Mini ATX Drive bays - 1x 3.5” - 1x 2.5” - 1x convertible 2.5/3.5” - 1x 5.25” Front panel I/O - 2x USB 3.0 ports - 1x Headphone out - 1x Microphone in Expansion slots Fans Fans included -1x 120mm front intake... - Page 11 Technical Support and Customer Service US & Canada 1-888- 270-7090 support@riotoro.com customerservice@riotoro.com Sales sales@riotoro.com © Copyright 2016 RIOTORO. All rights reserved. All trademarks are the property of their respective owners. Reproduction in whole or part without written permission is prohibited.
Need help?
Do you have a question about the CR1080 and is the answer not in the manual?
Questions and answers