Setling/Removing discs
latch
Grtp here and shde
Loader carnage
............
D',::
.........
L'::::::::
...................................
EIJp this part upward
]
Pull gently on both ends to open the front
panel.
[]
• Unless setting
or removing
discs, keep hands out of the
changer
while open
You could injure yourselt
if you get
entangled in the internal mechanism
• Keep cassette tapes away from the magnetic latches
]
Slide the loader carriage to the slot where the
disc is to be inserted.
Slot No 0 (SINGLE) is reserved for single d_scplay (O page 9 )
]
Set the disc on the loader and flip the loader
upwards.
• Do not use 3" (8 cm) discs fitted
wtth expander
r_ngs
Expander rings could damage the d_sc slots
• Do not use cleaning
discs or warped discs
These could
damage your changer
• Do not use discs with poorly attached
labels or stickers
Adhesive protruding
from peeled off sttckers can cause the
changer to malfunction
• Do not put anything other than discs in the changer
• Do not use irregular shaped CDs (heart-shape,
etc )
]
Close the front panel gently.
I_rRF3
If you leave the front panel open while a disc =sm play the
changer wdl stop when the d_sc is fin_shed
[]
m
I=l
1. Open the front panel.
2. Slide the loader carriage to the slot you want,
3. Press the eject button on the loader carriage,
Loader carnage
Elect button
You can set and remove discs while another discs _splaying
• Do not set a d_sc m the slot of the disc being played (slot flashes)
The d_sc _n play _s returned to Its slot when hn_shed If two d_scs
somehow lain in a slot, they could be damaged
When thrs hap-
pens,
the message
'TAKE
OUT'
wdl appear
on the d_splay
Remove the disc that doesn't belong in the stot and press the stop
button
• Do not open the CD front panel and press the eject button when
CHECKING
DISCS" appears m the d_splay The CD mechanfsm
will be damaged ff the eject button is pressed at this time
• Sometimes the front panel cannot be opened whrre a disc _splay-
ing In this case wart unhF you can open _t
ROT4941
Need help?
Do you have a question about the SL-MC7 and is the answer not in the manual?
Questions and answers