Toshiba VF-S15 Instruction Manual page 244

6.34.9 Select the operation panel stop pattern
f721 : Selection of operation panel stop pattern
 Function
1)
2)
[Parameter setting]
f721
6
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
This parameter are used to select a panel stop pattern in which the motor started by pressing the
key on the operation panel.
STOP
RUN
Deceleration stop
The motor slows down to a stop in the deceleration time set with  (or  or ).
Coast stop
The inverter cuts off power supply to the motor. The motor comes to a stop after coasting for a while.
Depending on the load, the motor may keep running for a longer time.
Title Function
Panel stop pattern
Adjustment range
0: Deceleration stop
1: Coast stop
F-132
E6581611
Default setting
0