Filling The Water Tank - STEAMONE UNILYS User Manual

fig.8
Hose & Steam head assembly
fig.10

Filling the water tank

Never use water that contains additives (starch, perfume,
aromatic substances, softener...) in the steamer. Additives can
affect the properties of steam, corrode internal parts and lead
to the formation of deposits.
The steamer can be used with tap water. If the water in your
area is hard, Steamone recommends you that use distilled or
demineralized water to reduce scaling.
fig.12
Locking the pole
1. Adjust the pole to its maximum
height by sliding it upwards then
locking the 3 clips. (fig.8)
2. Slide the hanger on to the pole and
tighten the hanger base by turning
in a counter clockwise direction.
(fig.10)
3. Place the head support/hook on top
of the pole and push down to se-
cure. (fig.9)
1.
Insert the hose connector into the
base until resistance is felt. Lock
the connector by turning clockwise.
(fig.10 & fig.11)
2. Hang the steam head on the head
support/hook. (fig.1)
1. Ensure that the steamer is unplugged. Remove the wa-
ter tank from the base of the appliance by pulling the
handle upwards. (fig.12)
6
fig.9
fig.11