Part Replacement Method Of Jog Section; Part To Replace In Part Replacement Simultaneously; Caution In Sheet Sw Installation; Jog Section View - Pioneer CDJ-1000 Service Manual

CDJ-1000
QQ
3 7 63 1515 0

7.1.4 Part Replacement Method of JOG Section

7.1.4.1 A part to Replace in Part Replacement Simultaneously
Sheet SW
(DSX1057)
Sheet SW
JOG Sheet A
JOG Sheet B
A Part to
JOG Sheet C
Replace
Simultaneo- JOG Plate
usly
JOG Holder
JOG Dial A
JOG Dial B
Note : Do not need to replace the JOG Holder when replacing the Sheet SW. However, be careful so that paste
does not remain on the former Sheet SW.
JOG Panel
JOG Plate
TE
L 13942296513
JOG Dial A
JOG Sheet A
JOG Dial B
JOG Sheet C
(×8)
JOG Sheet B
www
JOG Holder
Encoder Plate
.
Fig. 1 JOG Section View
66
http://www.xiaoyu163.com
JOG Sheet A JOG Sheet B
(DXB1757) (DXB1757)
Sheet SW
x ao u163
y
i
JFLB Assy
http://www.xiaoyu163.com
2 9
8
Replacement Part
JOG Sheet C JOG Plate JOG Holder
(DXB1757) (DAH2052) (DNK3872)

7.1.4.2 Caution in Sheet SW Installation

1 Be careful not to bend and fold the Sheet SW.
2 Confirm that the dust or trash does not adhere to pasting side
(JOG Holder).
In addition, when tear off the former Sheet SW and put a new
part, completely wipe the JOG Holder off with alcohol so that
paste does not remain on the pasting side of JOG Holder.
3 Bend a cable of the Sheet SW in a right angle in difference in
Q Q
grade shape, and put it in corner hole of the JOG Holder.
3 6 7 1 3 1 5
Ÿ
(Fig. )
4 When put the Sheet SW, match the position not to run aground
on rib of the internal circumference of JOG Holder. (Fig.
5 Sheet SW pushes all the sides including the point of contact
fully, and put it. (No good air getting into it.)
6 When insert a cable in connector, release a lock by all means,
and connector locks after inserting it.
7 A cable performs styling as shown in Fig.
JFLB Assy (DWG1549).
3
4
Ÿ
Fig.
8 It assembles so that an encoder plate may go into the slot of the
encoder guide of JOGB Assy.
JOGB ASSY JOGB ASSY
co
.
Encoder plate Encoder guide
9 4 2 8
JOG Dial A JOG Dial B
(DNK3870) (DNK3871)
0 5 8 2 9 9 4 2 8
Ÿ
)
!
after installing the
7
!
Fig. (Bottom View)
encoder guide
m
encoder plate
JOGB ASSY
[ Sectional view ]
9 9
9 9