Philips XZ5800 Manual page 20

English
20
Cleaning the click-on attachments
Never dry trimmer or beard styler attachments with
a towel or tissue, as this may damage the trimming
teeth.
The accessories supplied may vary for different
products. The box shows the accessories that have
been supplied with your appliance.
Cleaning the trimmer attachment
Clean the trimmer attachment every time you have
used it.
(S5230/04, S5210/04, S5082/61, S5081/04,
S5079/04, S5078/04 only)
1 Switch on the appliance with the trimmer
attachment attached.
2 Rinse the attachment under a warm tap.
3 After cleaning, switch off the appliance.
4 Carefully shake off excess water and let the
attachment dry.
Tip: For optimal performance, lubricate the teeth of
the attachment with a drop of sewing machine oil
every six months.
Cleaning the cleansing brush attachment
Clean the cleansing brush attachment every time
you have used it.
(XZ5800/69, S5095/58, S5091/50, S5090/58 only)
1 Switch off the appliance.
2 Detach the brush head from the brush base.
3 Clean the parts thoroughly with warm water
and soap.
4 Dry the cleansing brush attachment with a
towel.