Maintenance And Cleaning; Technical Specifications - Sencor SFN 9011SL User Manual

MAINTENANCE AND CLEANING


Before cleaning the fan, turn it off and unplug it.
CLEANING THE WATER TANK

After each use, pour the remaining water out of the tank Aqs and rinse it with clean water.

Regularly remove lime deposits from the tank Aqs – at least once a month. To remove lime deposits,
use a clean cloth and a solution of warm water and neutral detergent. After using the detergent,
rinse the tank Aqs with clean water.
CLEANING THE REMOVABLE FILTERS

Clean the dust and water fi lters A8, A9 regularly – at least once a month. Remove the fi lters and
clean them with a soft brush, using a neutral cleaning agent. Then thoroughly rinse under fl owing
water and allow to dry naturally. After the fi lters have dried, reinstall them.
Caution:
Do not dry the fi lters with a hair dryer or in direct sunlight.
CLEANING THE OUTER CASING

Wipe the exterior with a clean, dry cloth. For tougher dirt, use a cloth slightly moistened with
a solution of warm water and neutral detergent.

Do not clean any part of the fan with aggressive substances, petrol or any other solvent.

If you will not be using the fan for an extended time, store it in a clean, dry place. Remove the
battery from the remote control.

TECHNICAL SPECIFICATIONS

Nominal voltage ..............................................................................................................................220−240 V
Nominal frequency ..................................................................................................................................50 Hz
Rated power input .................................................................................................................................110 W
Safety class (for electric shock protection) ................................................................................................... II
Noise level ...........................................................................................................................................66 dB(A)
Maximum fan fl ow rate ............................................................................................................. 20,81 m³/min
Service value .......................................................................................................................... 0,23 (m³/min)/W
Standby power consumption ..............................................................................................................0,19 W
Maximum air velocity ..........................................................................................................................3,37 m/s
Measurement standard for service value ............................ COMMISSION REGULATION (EU) No 206/2012
Contact details for obtaining more information .............................. FAST ČR, a. s., Černokostelecká 1621,
The declared noise emission level for this appliance is 66 dB(A), which represents level A of the acoustic
power relative to the reference acoustic power of 1 pW.
2015
Air Cooler
SFN 9011SL
EN-9
IEC 60879:1986, EN 50564:2011,
EN 60704-2-7:1998, EN 60704-1:2010
251 01 Říčany, Czech Republic
11/2015