If a KX-TD290 is to be installed (KX-TD1232 only):
Insert the plug into a jack on the unit.
Connect a grounding wire to the ground terminal on the KX-TD290.
7.
Tie all of the cords into a bundle. If other cords are exposed in the upper cabinets, tie them
also.
8.
Close the cabinet cover and secure the outside screw.
9.
Cover the cords with the cord holder (included).
Installation Manual
To Terminal Board or Modular
Jacks from the Central Office
Cord holder
Jack
1:
RA
(Receive)
2:
RB
4:
TB
(Transmit)
5:
TA
View of TEL Jack (Outside Line)
ISDN Installation
139