Manual Registration
There must be at least one handset already registered to the base unit or cell
station to carry out manual registration.
•
Ensure that the repeater is switched off
(disconnect the AC adaptor) (both LEDs are
OFF).
•
Power on the repeater, by connecting the AC
adaptor. The red LED will light for 2 seconds,
and then the green LED will flash slowly.
•
Hold down the repeater switch for 3 seconds.
The green LED and the red LED will flash
alternately.
•
Place your DECT base unit into registration mode by pressing and holding the
button for 10 seconds. This step is not necessary for registration to PBX cell
stations.
•
When the repeater has found a suitable cell
station or base unit, the green LED will flash
quickly.
•
Please note :1) We recommend that you power down any cell station that you do
8 | Operating Instructions
not wish to connect to the Repeater prior to Registration.
Ï
Ï